Free cost calculator

Home › Cost guides › Alabama › Anniston & Oxford, AL

Heat Pump Replacement Cost in Anniston & Oxford, AL (2026)

Typical price for a 2,200 sq ft home getting a new 4-ton heat pump and air handler in Anniston & Oxford, AL: about $10,876 installed. Use the free itemized estimate below to check contractor quotes.

Request free local quotesCustomize this estimate
Equipment & Materials
$6,790
Heat pump, air handler, line set, pad & thermostat
= Rows 4–7 below, materials only
Removal, Electrical & Hookup
$1,478
Old-system removal, refrigerant, wiring & condensate
= Rows 1–3 below, installed price
Turnkey Installed Total
$10,876
Complete changeout by a licensed HVAC contractor
= All rows below, installed price

Prices updated Oct 2026

A fair bid from a local builder in Anniston & Oxford, AL should land between $9,245 and $13,051, about 15% below to 20% above this estimate. Quotes for the same building can vary widely, so get 3 quotes on the same spec. If one is outside this range, ask what it includes or leaves out.

Estimate only. Actual prices vary. No guarantee or warranty. Use as a guide only. Read the full disclaimer

Itemized cost breakdown

#ItemQuantityMaterialsLaborInstalled
1Remove & recycle old systemRefrigerant recovery, haul-away1 system$143$149$350
2Refrigerant, condensate & duct transitionsNitrogen purge, condensate line, sheet-metal plenumSummary fastener and parts allowance$516$149$798
3Electrical whip & breakerNew breaker, whip, surge protector1 circuit$201$74$330
44-ton heat pump (outdoor unit)15.2 SEER2 single-stage, R-454B refrigerant1 unit · 4 tons$4,126$297$5,308
5Matching air handler + backup heatMulti-speed air handler, 10 kW heat strip1 air handler$1,986$297$2,740
6Line set, pad & disconnectDetails in the spec sheet🔒 Included in $19 spec sheet——🔒
7ThermostatDetails in the spec sheet🔒 Included in $19 spec sheet——🔒
8Permit, startup & warranty registrationDetails in the spec sheet🔒 Included in $19 spec sheet——🔒
Turnkey total$7,898$1,165$10,876
Customize this estimate (free)Request free local quotes

Prices use 2026 material costs and typical local crew rates. Site work, custom options and material price swings can move your final price.

$19 one-time

Builder Spec Sheet & Shopping List

A sheet for comparing 3 builder bids line by line, and a builder-ready spec so every builder prices the same building. Plus the same line items as this page in an editable Excel file and a PDF (spec, quantity, materials, labor and installed price) and a permit and site-prep checklist. 30-day money-back.

Get my spec pack
Free

Request free local quotes

Tell us your ZIP and timeline. We're still adding builders in your area; we'll connect you when one is available. No cost, no obligation.

Request free quotes

Common questions

How much does heat pump replacement cost in Anniston & Oxford, AL?

For a 2,200 sq ft home getting a new 4-ton heat pump and air handler, expect about $10,876 with a local pro in 2026. Fair quotes usually fall between $9,245 and $13,051.

Is this a free estimate template?

Yes. The breakdown on this page is free. The $19 Spec Pack puts these same line items in an editable Excel file and a PDF spec sheet you can hand to contractors, plus a permit checklist and a bid-comparison sheet.

How do I compare contractor quotes?

Ask each contractor to price the same scope, then compare their numbers line by line against this breakdown. A quote far below the range often leaves something out.

Related cost guides