Free cost calculator

Home › Cost guides › Alabama › Anniston & Oxford, AL

Concrete Slab & Flatwork Cost in Anniston & Oxford, AL (2026)

Typical price for a 30×40 (1,200 sq ft) 4-inch reinforced slab in Anniston & Oxford, AL: about $10,873 installed. Use the free itemized estimate below to check contractor quotes.

Request free local quotesCustomize this estimate
Concrete & Rebar Materials
$3,855
Ready-mix concrete, rebar, forms & vapor barrier
= Rows 3–6 below, materials only
Excavation & Gravel Base
$2,404
Grading, haul-off & compacted stone base
= Rows 1–2 below, installed price
Turnkey Installed Total
$10,873
Formed, poured & finished by a local concrete crew
= All rows below, installed price

Prices updated Oct 2026

A fair bid from a local builder in Anniston & Oxford, AL should land between $9,242 and $13,048, about 15% below to 20% above this estimate. Quotes for the same building can vary widely, so get 3 quotes on the same spec. If one is outside this range, ask what it includes or leaves out.

Estimate only. Actual prices vary. No guarantee or warranty. Use as a guide only. Read the full disclaimer

Itemized cost breakdown

#ItemQuantityMaterialsLaborInstalled
1Excavation & gradingStrip topsoil, cut/fill to grade, haul-off1,480 sq ft$495$549$1,253
2Compacted gravel base (4")Crushed stone, plate-compacted20.7 tons$593$366$1,151
34" ready-mix concrete (3,500 PSI)Includes 5% waste and thickened edges19.2 cu yd$2,310$0$2,772
4#4 rebar grid (18" on center) & chairsTied rebar on chairs, dowels at doors1,760 lf$924$624$1,858
5Forms, pour & finish laborSet forms, place, power-trowel finish, cure1,200 sq ft$334$1,836$2,604
6Vapor barrier & control jointsDetails in the spec sheet🔒 Included in $19 spec sheet——🔒
7Concrete pump (trailer-mounted)Details in the spec sheet🔒 Included in $19 spec sheet——🔒
8Permit & inspection (if required)Details in the spec sheet🔒 Included in $19 spec sheet——🔒
Turnkey total$5,428$3,667$10,873
Customize this estimate (free)Request free local quotes

Prices use 2026 material costs and typical local crew rates. Site work, custom options and material price swings can move your final price.

$19 one-time

Builder Spec Sheet & Shopping List

A sheet for comparing 3 builder bids line by line, and a builder-ready spec so every builder prices the same building. Plus the same line items as this page in an editable Excel file and a PDF (spec, quantity, materials, labor and installed price) and a permit and site-prep checklist. 30-day money-back.

Get my spec pack
Free

Request free local quotes

Tell us your ZIP and timeline. We're still adding builders in your area; we'll connect you when one is available. No cost, no obligation.

Request free quotes

Common questions

How much does concrete slab & flatwork cost in Anniston & Oxford, AL?

For a 30×40 (1,200 sq ft) 4-inch reinforced slab, expect about $10,873 with a local pro in 2026. Fair quotes usually fall between $9,242 and $13,048.

Is this a free estimate template?

Yes. The breakdown on this page is free. The $19 Spec Pack puts these same line items in an editable Excel file and a PDF spec sheet you can hand to contractors, plus a permit checklist and a bid-comparison sheet.

How do I compare contractor quotes?

Ask each contractor to price the same scope, then compare their numbers line by line against this breakdown. A quote far below the range often leaves something out.

Related cost guides