Free cost calculator

Home › Cost guides › Alabama › Anniston & Oxford, AL

Metal Roof Replacement Cost in Anniston & Oxford, AL (2026)

Typical price for a 1,800 sq ft home (about 25 squares) re-roofed with 24-gauge standing seam in Anniston & Oxford, AL: about $32,175 installed. Use the free itemized estimate below to check contractor quotes.

Request free local quotesCustomize this estimate
Metal Roofing Materials
$14,933
24-ga standing seam panels, trim, underlayment & clips
= Rows 3–7 below, materials only
Tear-Off & Deck Prep
$3,473
Remove old roof, haul-off & deck repairs
= Rows 1–2 below, installed price
Turnkey Installed Total
$32,175
Complete re-roof by a local licensed roofer
= All rows below, installed price

Prices updated Oct 2026

A fair bid from a local builder in Anniston & Oxford, AL should land between $27,349 and $38,610, about 15% below to 20% above this estimate. Quotes for the same building can vary widely, so get 3 quotes on the same spec. If one is outside this range, ask what it includes or leaves out.

Estimate only. Actual prices vary. No guarantee or warranty. Use as a guide only. Read the full disclaimer

Itemized cost breakdown

#ItemQuantityMaterialsLaborInstalled
1Tear-off & disposal (1 layer)Remove shingles & felt, dumpster, magnet sweep25.0 squares$763$1,728$2,989
2Roof deck repair allowanceReplace up to 8% of decking, re-nail to code7 sheets$160$243$484
3High-temp synthetic underlaymentIce & water shield at eaves/valleys + synthetic field25.0 squares$1,001$743$2,093
424-ga standing seam panels16" wide panels, mechanical seam, SMP finish25.0 squares$11,083$6,425$21,010
5Ridge, eave, rake & valley trimMatching trim, Z-closures, flashing234 lf$1,676$926$3,122
6Panel clips, pancake screws & sealantDetails in the spec sheet🔒 Included in $19 spec sheet——🔒
7Pipe boots, vented ridge & chimney flashingDetails in the spec sheet🔒 Included in $19 spec sheet——🔒
8Permit & final inspectionDetails in the spec sheet🔒 Included in $19 spec sheet——🔒
Turnkey total$16,123$10,733$32,175
Customize this estimate (free)Request free local quotes

Prices use 2026 material costs and typical local crew rates. Site work, custom options and material price swings can move your final price.

$19 one-time

Builder Spec Sheet & Shopping List

A sheet for comparing 3 builder bids line by line, and a builder-ready spec so every builder prices the same building. Plus the same line items as this page in an editable Excel file and a PDF (spec, quantity, materials, labor and installed price) and a permit and site-prep checklist. 30-day money-back.

Get my spec pack
Free

Request free local quotes

Tell us your ZIP and timeline. We're still adding builders in your area; we'll connect you when one is available. No cost, no obligation.

Request free quotes

Common questions

How much does metal roof replacement cost in Anniston & Oxford, AL?

For a 1,800 sq ft home (about 25 squares) re-roofed with 24-gauge standing seam, expect about $32,175 with a local pro in 2026. Fair quotes usually fall between $27,349 and $38,610.

Is this a free estimate template?

Yes. The breakdown on this page is free. The $19 Spec Pack puts these same line items in an editable Excel file and a PDF spec sheet you can hand to contractors, plus a permit checklist and a bid-comparison sheet.

How do I compare contractor quotes?

Ask each contractor to price the same scope, then compare their numbers line by line against this breakdown. A quote far below the range often leaves something out.

Related cost guides