Free cost calculator

Home › Cost guides › Alabama › Anniston & Oxford, AL

Pole Barn Framing & Erection Cost in Anniston & Oxford, AL (2026)

Typical price for a 30×40×12 post-frame building on a 4-inch slab in Anniston & Oxford, AL: about $39,264 installed. Use the free itemized estimate below to check contractor quotes.

Request free local quotesCustomize this estimate
Materials-Only Kit
$15,914
Delivered lumber, trusses, metal panels & hardware
= Rows 3–7 below, materials only
Concrete Slab & Site Prep
$8,749
Grading, forms, rebar & poured concrete floor
= Rows 1–2 below, installed price
Turnkey Installed Total
$39,264
Complete build with a local licensed crew, materials & slab
= All rows below, installed price

Prices updated Oct 2026

A fair bid from a local builder in Anniston & Oxford, AL should land between $33,374 and $47,117, about 15% below to 20% above this estimate. Quotes for the same building can vary widely, so get 3 quotes on the same spec. If one is outside this range, ask what it includes or leaves out.

Estimate only. Actual prices vary. No guarantee or warranty. Use as a guide only. Read the full disclaimer

Itemized cost breakdown

#ItemQuantityMaterialsLaborInstalled
1Site grading & building padLaser-leveled pad 2 ft past the walls, compacted fill1,496 sq ft$643$891$1,841
24" standard concrete slab3,500 PSI ready-mix, #4 rebar 18" grid, vapor barrier, forms15.9 cu yd$3,262$2,495$6,908
36×6 treated posts, girts & framing lumber18 posts × 16 ft (.60 CCA ground-contact), 2×6 girts at 2 ft incl. gable girts, 2×8 treated skirt board18 posts + 888 lf$3,368$3,267$7,962
430' engineered roof trusses & purlins11 trusses at 4 ft on center, standard wind allowance, 2×4 purlins at 2 ft (18 rows)11 trusses + 756 lf$3,346$1,901$6,296
529-ga metal roof & wall panels + trimPainted steel panels, ridge cap, corner/door/base trim, closures31.5 squares$4,203$1,792$7,194
6Overhead & walk doorsDetails in the spec sheet🔒 Included in $19 spec sheet——🔒
7Screws, hardware & condensation barrierDetails in the spec sheet🔒 Included in $19 spec sheet——🔒
8Permit, stamped drawings & deliveryDetails in the spec sheet🔒 Included in $19 spec sheet——🔒
Turnkey total$21,127$11,593$39,264
Customize this estimate (free)Request free local quotes

Prices use 2026 material costs and typical local crew rates. Site work, custom options and material price swings can move your final price.

$19 one-time

Builder Spec Sheet & Shopping List

A sheet for comparing 3 builder bids line by line, and a builder-ready spec so every builder prices the same building. Plus the same line items as this page in an editable Excel file and a PDF (spec, quantity, materials, labor and installed price) and a permit and site-prep checklist. It also includes a full itemized takeoff: panel cut lengths, trim, a fastener schedule, lumber counts and concrete yards, with the spacing rule and source for each line. 30-day money-back.

Get my spec pack
Free

Request free local quotes

Tell us your ZIP and timeline. We're still adding builders in your area; we'll connect you when one is available. No cost, no obligation.

Request free quotes

Common questions

How much does pole barn framing & erection cost in Anniston & Oxford, AL?

For a 30×40×12 post-frame building on a 4-inch slab, expect about $39,264 with a local pro in 2026. Fair quotes usually fall between $33,374 and $47,117.

Is this a free estimate template?

Yes. The breakdown on this page is free. The $19 Spec Pack puts these same line items in an editable Excel file and a PDF spec sheet you can hand to contractors, plus a permit checklist and a bid-comparison sheet.

How do I compare contractor quotes?

Ask each contractor to price the same scope, then compare their numbers line by line against this breakdown. A quote far below the range often leaves something out.

Related cost guides