Free cost calculator

Home › Cost guides › Alabama › Anniston & Oxford, AL

40×60 Concrete Slab Cost in Anniston & Oxford, AL (2026)

A 40×60 concrete slab in Anniston & Oxford, AL costs about $27,787 turnkey in 2026 ($11.58 per sq. ft.). Here's the itemized breakdown of materials, site prep and labor, using local crew rates.

Request free local quotesCustomize this estimate
Concrete & Rebar Materials
$10,069
Ready-mix concrete, rebar, forms & vapor barrier
= Rows 3–6 below, materials only
Excavation & Gravel Base
$5,562
Grading, haul-off & compacted stone base
= Rows 1–2 below, installed price
Turnkey Installed Total
$27,787
$11.58 per sq. ft.
Formed, poured & finished by a local concrete crew
= All rows below, installed price

Prices updated Oct 2026

A fair bid from a local builder in Anniston & Oxford, AL should land between $23,619 and $33,344, about 15% below to 20% above this estimate. Quotes for the same building can vary widely, so get 3 quotes on the same spec. If one is outside this range, ask what it includes or leaves out.

Estimate only. Actual prices vary. No guarantee or warranty. Use as a guide only. Read the full disclaimer

Itemized cost breakdown

#ItemQuantityMaterialsLaborInstalled
1Excavation & gradingStrip topsoil, cut/fill to grade, haul-off2,800 sq ft$936$1,505$2,929
2Compacted gravel base (4")Crushed stone, plate-compacted41.5 tons$1,189$1,005$2,633
36" ready-mix concrete (3,500 PSI)Includes 5% waste and thickened edges51.9 cu yd$6,245$0$7,494
4#4 rebar grid (12" on center) & chairsTied rebar on chairs, dowels at doors5,280 lf$2,773$1,708$5,377
5Forms, pour & finish laborSet forms, place, power-trowel finish, cure2,400 sq ft$478$5,024$6,602
6Vapor barrier & control jointsDetails in the spec sheet🔒 Included in $19 spec sheet——🔒
7Concrete pump (trailer-mounted)Details in the spec sheet🔒 Included in $19 spec sheet——🔒
8Permit & inspection (if required)Details in the spec sheet🔒 Included in $19 spec sheet——🔒
Turnkey total$13,147$10,044$27,787
Customize this estimate (free)Request free local quotes

Prices use 2026 material costs and typical local crew rates. Site work, custom options and material price swings can move your final price.

$19 one-time

Builder Spec Sheet & Shopping List

A sheet for comparing 3 builder bids line by line, and a builder-ready spec so every builder prices the same building. Plus the same line items as this page in an editable Excel file and a PDF (spec, quantity, materials, labor and installed price) and a permit and site-prep checklist. 30-day money-back.

Get my spec pack
Free

Request free local quotes

Tell us your ZIP and timeline. We're still adding builders in your area; we'll connect you when one is available. No cost, no obligation.

Request free quotes

Common questions

How much does a 40×60 Concrete Slab cost in Anniston & Oxford, AL?

About $27,787 fully built by a local crew in 2026, or roughly $10,069 for the materials kit alone. Most fair bids land between $23,619 and $33,344.

What drives the price up or down?

Site prep (slope, soil, driveway access), floor choice, doors and insulation, and local labor rates. Lumber and steel prices also move a few percent a year.

Do I need a permit?

Permit requirements vary by county and city. Many unincorporated areas of Alabama don't enforce a building code, while cities and some counties do. Check with your county or city building office before you build.

How do I make sure I'm getting a fair quote?

Get at least 3 itemized bids for the same spec. Compare them line by line against this breakdown and ask about anything far above or below it.

Related cost guides