Free cost calculator

Home › Cost guides › Alabama › Anniston & Oxford, AL

16×24 Composite Deck Cost in Anniston & Oxford, AL (2026)

A 16×24 composite deck in Anniston & Oxford, AL costs about $18,234 turnkey in 2026 ($47.48 per sq. ft.). Here's the itemized breakdown of materials, site prep and labor, using local crew rates.

Request free local quotesCustomize this estimate
Deck Materials
$6,641
Composite boards, railing, framing lumber & hardware
= Rows 3–7 below, materials only
Footings & Framing
$6,299
Concrete footings, posts, beams & joists installed
= Rows 1–2 below, installed price
Turnkey Installed Total
$18,234
$47.48 per sq. ft.
Complete deck built by a local licensed crew
= All rows below, installed price

Prices updated Oct 2026

A fair bid from a local builder in Anniston & Oxford, AL should land between $15,499 and $21,881, about 15% below to 20% above this estimate. Quotes for the same building can vary widely, so get 3 quotes on the same spec. If one is outside this range, ask what it includes or leaves out.

Estimate only. Actual prices vary. No guarantee or warranty. Use as a guide only. Read the full disclaimer

Itemized cost breakdown

#ItemQuantityMaterialsLaborInstalled
1Concrete footings & post bases12 footings, 12" × 36" deep, 6×6 treated posts12 footings$711$950$1,993
2Pressure-treated framing (joists 12" o.c.)25 2×10 joists, doubled 2×10 beams, flashed ledger25 joists + beams$1,687$1,901$4,306
3Standard capped composite decking5.5" boards with picture-frame border922 lf$2,906$1,614$5,424
4Composite railing system36" composite rails, posts & balusters52 lf$2,284$901$3,822
5Stairs5 steps, 4 ft wide, composite treads & risers5 steps$645$347$1,190
6Hidden fasteners & joist tapeDetails in the spec sheet🔒 Included in $19 spec sheet——🔒
7Joist hangers, lags & structural screwsDetails in the spec sheet🔒 Included in $19 spec sheet——🔒
8Permit & inspectionsDetails in the spec sheet🔒 Included in $19 spec sheet——🔒
Turnkey total$9,345$5,901$18,234
Customize this estimate (free)Request free local quotes

Prices use 2026 material costs and typical local crew rates. Site work, custom options and material price swings can move your final price.

$19 one-time

Builder Spec Sheet & Shopping List

A sheet for comparing 3 builder bids line by line, and a builder-ready spec so every builder prices the same building. Plus the same line items as this page in an editable Excel file and a PDF (spec, quantity, materials, labor and installed price) and a permit and site-prep checklist. 30-day money-back.

Get my spec pack
Free

Request free local quotes

Tell us your ZIP and timeline. We're still adding builders in your area; we'll connect you when one is available. No cost, no obligation.

Request free quotes

Common questions

How much does a 16×24 Composite Deck cost in Anniston & Oxford, AL?

About $18,234 fully built by a local crew in 2026, or roughly $6,641 for the materials kit alone. Most fair bids land between $15,499 and $21,881.

What drives the price up or down?

Site prep (slope, soil, driveway access), floor choice, doors and insulation, and local labor rates. Lumber and steel prices also move a few percent a year.

Do I need a permit?

Permit requirements vary by county and city. Many unincorporated areas of Alabama don't enforce a building code, while cities and some counties do. Check with your county or city building office before you build.

How do I make sure I'm getting a fair quote?

Get at least 3 itemized bids for the same spec. Compare them line by line against this breakdown and ask about anything far above or below it.

Related cost guides