Home › Cost guides › Florida › Tallahassee, FL
40×60 Barndominium Shell Cost in Tallahassee, FL (2026)
A 40×60 barndominium shell in Tallahassee, FL has a dried-in shell estimate of about $110,630 in 2026 ($46.10 per sq. ft.). Here's the itemized breakdown of materials, site prep and labor, using local crew rates. A 40×60 barndominium shell gives 2,400 square feet, room for a family home or a home plus garage on a lot around Tallahassee.
Try another size or city Free. The numbers below update instantly.
40×60 ft, 14 ft walls (2,400 sq. ft.)
Prices updated Oct 2026
Reference wind speed for this area: 118 mph (ASCE Hazard Tool value at the principal city, not a design value). Wind values here are reference figures for pricing. Confirm the design wind speed with your local building department or engineer.
Estimate only. Actual prices vary. No guarantee or warranty. Use as a guide only. Read the full disclaimer
Itemized cost breakdown
| # | Item | Quantity | Installed |
|---|---|---|---|
| 1 | Site grading & building padLaser-leveled pad 2 ft past the walls, compacted fill | 2,816 sq ft | $3,490 |
| 2 | 4" standard concrete slab + plumbing sleeves3,500 PSI ready-mix, #4 rebar 18" grid, vapor barrier, forms | 31.7 cu yd | $16,530 |
| 3 | 6×6 treated posts, girts & framing lumber26 posts × 18 ft (.60 CCA ground-contact), 2×6 girts at 2 ft incl. gable girts, 2×8 treated skirt board | 26 posts + 1,496 lf | $19,870 |
| 4 | 40' engineered roof trusses & purlins31 trusses at 2 ft on center, standard wind allowance, 2×4 purlins at 2 ft (24 rows) | 31 trusses + 1,488 lf | $21,985 |
| 5 | 29-ga metal roof & wall panels + trimPainted steel panels, ridge cap, corner/door/base trim, closures | 56.3 squares | $12,694 |
| 6 | Doors & windowsDetails in the spec sheet | 🔒 Included in $9.99 spec sheet | 🔒 |
| 7 | Closed-cell spray foam (roof & walls)Details in the spec sheet | 🔒 Included in $9.99 spec sheet | 🔒 |
| 8 | Screws, hardware & condensation barrierDetails in the spec sheet | 🔒 Included in $9.99 spec sheet | 🔒 |
| 9 | Permit, stamped drawings & deliveryDetails in the spec sheet | 🔒 Included in $9.99 spec sheet | 🔒 |
| Dried-in shell estimate | $110,630 |
The totals above already include every row, including the 🔒 rows. The $9.99 spec sheet lists them item by item with quantities.
What do these terms mean?
- 29-ga metal: the steel panel thickness (a lower gauge number is thicker).
- .60 CCA posts: treated posts rated to go in the ground.
- Purlins and girts: boards across the roof and walls that the metal panels screw into.
- PSI: a concrete strength rating.
- #4 rebar: ½-inch steel bar laid in a grid inside the concrete.
- Vapor barrier: plastic sheeting under the slab that keeps ground moisture out.
Prices use 2026 material costs and typical local crew rates. Site work, custom options and material price swings can move your final price.
Builder Spec Sheet & Shopping List
A sheet for comparing 3 builder bids line by line, and a builder-ready spec so every builder prices the same building.
- Every line item on this page, including the 🔒 rows, in an editable Excel file and a PDF (spec, quantity, materials, labor and installed price)
- A permit and site-prep checklist
- A full itemized takeoff: panel cut lengths, trim, a fastener schedule, lumber counts and concrete yards, with the spacing rule and source for each line
30-day money-back.
Get my spec sheet ($9.99)Save a free project request
Tell us your ZIP and timeline. We aren't connecting requests with builders yet. No cost, no obligation.
Save my requestPlanning a 40×60 barndominium shell in the Tallahassee area
A 40×60 barndominium shell gives 2,400 square feet for a home and shop on acreage in Wakulla, Jefferson or Gadsden County. Wakulla and Jefferson grew nearly 10 percent since 2020. Check the flood zone for your parcel, and ask builders when they would dry in the shell given wet summers and some freezing nights in winter.
- With about 103 hot days and 27 freezing nights a year at the airport, plan the insulation for both seasons.
- The Tallahassee airport averages about 59 inches of precipitation a year (NOAA 1991–2020). A big roof needs gutters and a drainage plan.
Tallahassee versus the Florida statewide estimate
For a 40×60 barndominium shell, the Tallahassee estimate runs about 6% below the Florida statewide figure (both are estimates; bids set the real price). Tallahassee construction and extraction wages averaged about 79% of the U.S. mean in May 2025 (BLS OEWS), and Tallahassee goods prices sat near 96% of the U.S. level in 2024 (BEA RPP). That Tallahassee area factor applies fully to crew labor and partly to materials; the Florida statewide page uses an internal planning allowance instead.
Building around Tallahassee and the Big Bend
The Tallahassee metro area covers Leon, Gadsden, Wakulla and Jefferson counties. Tallahassee, with about 205,100 residents in July 2024, is by far the largest city. The smaller towns include Quincy, Midway, Chattahoochee, Monticello and Havana. Wakulla and Jefferson counties each grew nearly 10 percent from 2020 to 2024, while Leon grew about 3 percent.
Farms around Tallahassee tend to be large. Jefferson County farms averaged about 317 acres in 2022, and Leon County farms about 188. Jefferson ranked 11th in Florida for nursery and greenhouse sales and 13th for cattle and calves. Wakulla County authorized about 518 new single-unit homes in 2025, close to Leon's 617.
Tallahassee Regional Airport has the most freezing nights of the Florida metros in this group: about 10 in a typical January and 7 in December. It also averages about 7.8 inches of rain in June and 7.6 in August.
Tallahassee grew about 4.5 percent between April 2020 and July 2024, and Monticello about 6 percent, while Midway and Gretna changed little. Woodland is a large part of the farmland: Jefferson County farms included about 88,500 acres of woodland in 2022 and Leon County farms about 44,300. Gadsden County authorized about 44 new single-unit homes in 2025 and Jefferson about 55.
Winter matters more here than in the other Florida metros in these guides. Tallahassee Regional Airport averages about 27 nights a year at or below 32°F, including about 5.2 in February and 2.1 in March, and normal January lows near 40.5°F. Summer is as hot as central Florida, with about 25 days at 90°F or hotter in July. March is wetter than April or May, at about 5.2 inches.
Leon County farms held about 1,940 cattle and calves and 460 horses and ponies in 2022, and reported about 5,400 acres of hay and haylage forage.
Local building offices
Contact the office for your address to confirm what applies to your project.
- City of Tallahassee Building Inspection (Growth Management) (the City of Tallahassee)
- Leon County Building Plans Review and Inspection (unincorporated Leon County)
The metro also includes Gadsden, Jefferson and Wakulla counties. For a property there, contact that county or the city it sits in.
Statewide reference: Florida Building Code Information System
Site references to look up for your Tallahassee address
The Tallahassee, FL metro area (Census CBSA 45220) covers a lot of ground, so look up the exact parcel rather than the city.
- ASCE Hazard Tool: wind, snow and other site loads for the Tallahassee-area parcel
- USDA NRCS Web Soil Survey: the soil map units under your Tallahassee site, including shrink-swell ratings
- FEMA Flood Map Service Center: the flood zone for your Tallahassee address
- NOAA Storm Prediction Center: severe-weather background for the Big Bend
- NOAA National Hurricane Center: tropical storm and hurricane background for the Tallahassee area
General planning reference from ASCE, USDA NRCS, FEMA and NOAA, retrieved October 26, 2026. Not a design value. Your engineer, builder and local authority set actual requirements.
Tallahassee climate at a glance
Tallahassee Regional Airport (NOAA station USW00093805) averages 68.4°F over the year, with about 58.81 inches of precipitation, about 103 days at 90°F or hotter and about 27 nights at 32°F or colder.
General planning reference from NOAA NCEI U.S. Climate Normals 1991–2020, retrieved October 26, 2026. Not a design value. Your engineer, builder and local authority set actual requirements. NOAA NCEI U.S. Climate Normals (1991–2020)
Compared with the other 5 Florida metro areas in these guides, Tallahassee has the fourth-highest count of 90°F days (range 68 in Pensacola to 120 in Cape Coral–Fort Myers), the highest count of freezing nights and the second-highest yearly precipitation (48.31 inches in Gainesville to 68.31 in Pensacola).
Tallahassee month by month
| Month | High °F | Low °F | Rain, in | Days ≥0.5 in | Days ≥90°F | Nights ≤32°F |
|---|---|---|---|---|---|---|
| Jan | 63.9 | 40.5 | 4.4 | 2.9 | 0 | 9.6 |
| Feb | 67.8 | 43.5 | 4.3 | 2.7 | 0 | 5.2 |
| Mar | 74.2 | 48.6 | 5.2 | 3.1 | 0 | 2.1 |
| Apr | 80.2 | 54.4 | 3.5 | 2.3 | 1.4 | 0.2 |
| May | 87.4 | 63 | 3.4 | 2.1 | 12.9 | 0 |
| Jun | 90.8 | 70.8 | 7.8 | 4.6 | 20.1 | 0 |
| Jul | 92.1 | 73 | 7.1 | 4.8 | 24.8 | 0 |
| Aug | 91.5 | 73.2 | 7.6 | 5 | 23.8 | 0 |
| Sep | 88.6 | 69.6 | 4.9 | 3.2 | 16.6 | 0 |
| Oct | 81.7 | 58.8 | 3.2 | 1.9 | 3 | 0.1 |
| Nov | 72.5 | 48 | 3.1 | 2.1 | 0 | 2.3 |
| Dec | 65.9 | 42.9 | 4.2 | 2.4 | 0 | 7.4 |
Tallahassee wettest: Jun (7.8 in). Tallahassee driest: Nov (3.1 in). May, Jun, Jul, Aug and Sep: 10+ days at 90°F each. Jan, Feb and Dec: 5+ freezing nights each. Jun–Sep deliver 27.4 of Tallahassee's 58.8 inches (47%). Tallahassee lows bottom out near 40.5°F in Jan; highs peak near 92.1°F in Jul. Roughly 17 Tallahassee days a year bring 1 inch or more.
NOAA normals, USW00093805, Tallahassee Regional Airport.
Counties, cities and towns in the Tallahassee metro area
The Tallahassee, FL metro area had about 397,675 residents in July 2024, across 4 counties. The price on this page is one figure for the whole metro area, so use the calculator if your site is far from the core.
Tallahassee places (10 incorporated, July 2024 residents within these counties): Tallahassee 205,089 (+4.5%); Quincy 8,119 (+1.1%); Midway 3,485 (−1.8%); Chattahoochee 3,028 (+2.3%); Monticello 2,754 (+6.3%); Havana 1,756 (+0.1%); Gretna 1,284 (−0.2%); Sopchoppy 476 (+12.8%); Greensboro 464 (+0.9%); St. Marks 312 (+12.6%).
| County | 2024 pop. | Since 2020 | 1-unit homes authorized, 2025 | Farms, 2022 | Avg. farm acres |
|---|---|---|---|---|---|
| Leon County, FL | 300,488 | +2.8% | 617 | 372 | 188 |
| Gadsden County, FL | 44,151 | +0.8% | 44 | 489 | 146 |
| Wakulla County, FL | 37,115 | +9.9% | 518 | 255 | n/a |
| Jefferson County, FL | 15,921 | +9.7% | 55 | 597 | 317 |
Tallahassee counties authorized 1,234 single-unit homes in 2025, led by Leon County (617) and Wakulla County (518). Wakulla County grew fastest from April 2020 to July 2024 (+9.9%); the lowest was Gadsden County (+0.8%). Among Tallahassee towns of 1,000+ people, Monticello grew fastest (2,591 to 2,754, +6.3%). The 2022 farm census counted 1,713 farms in Tallahassee's 4 counties; 979 of them (57%) had under 50 acres, and Jefferson County had the most (597, averaging 317 acres). By use, Tallahassee farmland broke down as 72,617 acres of cropland, 51,204 of pasture and 165,258 of woodland (some county figures withheld), so woodland led.
Census city and town estimates; Census Building Permits Survey; USDA NASS county profiles; Census county estimates. Retrieved October 26, 2026.
Material suppliers near Tallahassee
Listed for reference, not an endorsement.
- GMC Metal Roofing Supply: metal roofing and building panels (Marpan Ln, Tallahassee, per its website)
- Tri County Metals – Tallahassee: metal roofing and building panels
- Builders FirstSource – Tallahassee lumber yard: lumber and building materials
Office and supplier links checked October 26, 2026.
Common questions
How much does a 40×60 Barndominium Shell cost in Tallahassee, FL?
About $110,630 for a dried-in shell (structure, roof, walls and doors), built by a local crew. Interior finish, utilities and site work are not included. Roughly $47,804 for the materials kit alone. Most fair bids land between $94,036 and $132,756.
What drives the price up or down?
Site prep (slope, soil, driveway access), floor choice, doors and insulation, and local labor rates. Lumber and steel prices also move a few percent a year.
Do I need a permit?
Permit requirements vary by county and city. Check with your county or city building office before you build.
How do I make sure I'm getting a fair quote?
Get at least 3 itemized bids for the same spec. Compare them line by line against this breakdown and ask about anything far above or below it.
What should a Tallahassee barndominium shell be insulated for?
Both summer heat and winter cold. Ask builders what the walls and roof are prepared for, such as spray foam or a thermal break, and price insulation separately.
What does a barndo shell near Tallahassee leave out?
Interior walls, insulation, plumbing, wiring, HVAC, finishes and site work. Get those priced separately before you compare total budgets.
Estimate only. Actual prices vary. No guarantee or warranty. Use as a guide only. Read the full disclaimer
Related cost guides
- 40×60 Barndominium Shell cost in every state
- All Florida cost guides
- 24×24 Pole Barn cost in Tallahassee, FL
- 30×40 Pole Barn cost in Tallahassee, FL
- 40×60 Pole Barn cost in Tallahassee, FL
- 50×80 Pole Barn cost in Tallahassee, FL
- 30×40 Barndominium Shell cost in Tallahassee, FL
- 24×24 Detached Garage cost in Tallahassee, FL
- 30×40 Detached Garage cost in Tallahassee, FL
- 30×40 Concrete Slab cost in Tallahassee, FL
- 40×60 Concrete Slab cost in Tallahassee, FL
- 24×36 Standing Seam Metal Roof cost in Tallahassee, FL
- 16×24 Composite Deck cost in Tallahassee, FL
- 40×60 Barndominium Shell cost in Florida
- 40×60 Barndominium Shell cost in Cape Coral–Fort Myers, FL
- 40×60 Barndominium Shell cost in Ocala, FL