Home › Cost guides › Florida › Ocala, FL

40×60 Barndominium Shell Cost in Ocala, FL (2026)

A 40×60 barndominium shell in Ocala, FL has a dried-in shell estimate of about $110,727 in 2026 ($46.14 per sq. ft.). Here's the itemized breakdown of materials, site prep and labor, using local crew rates. A 40×60 barndominium shell (2,400 square feet) gives room for a home with a shop or barn space on a Marion County property.

Try another size or city Free. The numbers below update instantly.

40×60 ft, 14 ft walls (2,400 sq. ft.)

What does the $9.99 spec sheet add? ↓
Shell Materials Kit
$48,293
Frame, trusses, steel, windows, doors & spray foam
= Rows 3–8 below, materials only
Slab, Plumbing Sleeves & Site Prep
$19,869
Grading, under-slab plumbing sleeves & reinforced slab
= Rows 1–2 below, installed price
Dried-in Shell Estimate
$110,727
$46.14 per sq. ft.
Dried-in shell built by a local licensed crew
= All rows below, installed price

Prices updated Oct 2026

A fair bid from a local builder in Ocala, FL should land between $94,118 and $132,872, about 15% below to 20% above this estimate. Quotes for the same building can vary widely, so get 3 quotes on the same spec. If one is outside this range, ask what it includes or leaves out.

Reference wind speed for this area: 130 mph (ASCE Hazard Tool value at the principal city, not a design value). Wind values here are reference figures for pricing. Confirm the design wind speed with your local building department or engineer.

Estimate only. Actual prices vary. No guarantee or warranty. Use as a guide only. Read the full disclaimer

Itemized cost breakdown

#ItemQuantityMaterialsLaborInstalled
1Site grading & building padLaser-leveled pad 2 ft past the walls, compacted fill2,816 sq ft$1,210$1,673$3,460
24" standard concrete slab + plumbing sleeves3,500 PSI ready-mix, #4 rebar 18" grid, vapor barrier, forms31.7 cu yd$7,892$5,782$16,409
36×6 treated posts, girts & framing lumber26 posts × 18 ft (.60 CCA ground-contact), 2×6 girts at 2 ft incl. gable girts, 2×8 treated skirt board26 posts + 1,496 lf$7,649$8,910$19,871
440' engineered roof trusses & purlins31 trusses at 2 ft on center, high-wind allowance, 2×4 purlins at 2 ft (24 rows)31 trusses + 1,488 lf$13,320$5,346$22,399
529-ga metal roof & wall panels + trimPainted steel panels, ridge cap, corner/door/base trim, closures56.3 squares$7,301$3,208$12,611
6Doors & windowsDetails in the spec sheet🔒 Included in $9.99 spec sheet——🔒
7Closed-cell spray foam (roof & walls)Details in the spec sheet🔒 Included in $9.99 spec sheet——🔒
8Screws, hardware & condensation barrierDetails in the spec sheet🔒 Included in $9.99 spec sheet——🔒
9Permit, stamped drawings & deliveryDetails in the spec sheet🔒 Included in $9.99 spec sheet——🔒
Dried-in shell estimate$60,823$31,448$110,727

The totals above already include every row, including the 🔒 rows. The $9.99 spec sheet lists them item by item with quantities.

What do these terms mean?
  • 29-ga metal: the steel panel thickness (a lower gauge number is thicker).
  • .60 CCA posts: treated posts rated to go in the ground.
  • Purlins and girts: boards across the roof and walls that the metal panels screw into.
  • PSI: a concrete strength rating.
  • #4 rebar: ½-inch steel bar laid in a grid inside the concrete.
  • Vapor barrier: plastic sheeting under the slab that keeps ground moisture out.

Prices use 2026 material costs and typical local crew rates. Site work, custom options and material price swings can move your final price.

$9.99 one-time

Builder Spec Sheet & Shopping List

A sheet for comparing 3 builder bids line by line, and a builder-ready spec so every builder prices the same building.

  • Every line item on this page, including the 🔒 rows, in an editable Excel file and a PDF (spec, quantity, materials, labor and installed price)
  • A permit and site-prep checklist
  • A full itemized takeoff: panel cut lengths, trim, a fastener schedule, lumber counts and concrete yards, with the spacing rule and source for each line

30-day money-back.

Get my spec sheet ($9.99)
Free

Save a free project request

Tell us your ZIP and timeline. We aren't connecting requests with builders yet. No cost, no obligation.

Save my request

Planning a 40×60 barndominium shell in the Ocala area

A 40×60 barndominium shell suits the many Marion County owners who want living space and a barn or shop under one roof. At 2,400 square feet it can hold a home with an attached stall wing or garage. Most of the county is unincorporated, so contact the county office for your address (below), and price the well, septic and driveway with your site work.

  • Ocala's long hot season (about 110 days at 90°F or more) makes the insulation plan a big part of comfort and energy use.
  • Hurricane season runs June through November (NOAA National Hurricane Center). Ask about the engineered wind design and wind-rated doors.

Ocala versus the Florida statewide estimate

For a 40×60 barndominium shell, the Ocala estimate runs about 6% below the Florida statewide figure (both are estimates; bids set the real price). Ocala construction and extraction wages averaged about 77% of the U.S. mean in May 2025 (BLS OEWS), and Ocala goods prices sat near 96% of the U.S. level in 2024 (BEA RPP). That Ocala area factor applies fully to crew labor and partly to materials; the Florida statewide page uses an internal planning allowance instead.

Building in Marion County, first in Florida for horse sales

The Ocala metro area is Marion County, home to about 428,900 people in July 2024, up about 14 percent since 2020. Ocala had about 70,300 residents, Belleview about 6,200 and Dunnellon about 2,000. Most of the county lives outside the five incorporated towns. Marion authorized about 5,420 new single-unit homes in 2025.

Horses stand out in the county's farm data. In the 2022 Census of Agriculture, Marion ranked first in Florida and fourth in the nation for sales of horses, ponies, mules, burros and donkeys, with about 23,900 head on farms. The county had 3,329 farms averaging about 87 acres, and 1,924 of them were between 10 and 49 acres.

The weather follows central Florida's wet-and-dry pattern. The Ocala station averages about 7.4 inches of rain in June and 7.1 in August, against about 2.1 inches in November and 2.2 in April. It sees about 25 days at 90°F or hotter in July.

Fewer than one in five Marion County residents lived inside an incorporated town in July 2024: Ocala, Belleview, Dunnellon, McIntosh and Reddick together had about 79,500 of the county's 428,900 people. Ocala grew about 10 percent from April 2020. For an outbuilding on acreage, the farm census also shows the spread of tract sizes: besides the 1,924 farms of 10 to 49 acres, Marion had 704 farms of 1 to 9 acres and 499 of 50 to 179 acres.

Freezing nights are few but not zero at the Ocala station: about 3.4 in January and about 1.9 each in February and December. Hot weather runs from spring into fall, with close to 4 days at 90°F or hotter in both April and October and at least 15 in each month from May through September. The station averages about 4.8 June days and 5.0 August days with half an inch of rain or more.

Livestock shapes how the land is used: Marion ranked 12th in Florida for cattle and calf sales in 2022, and its farms reported about 25,900 acres of hay and haylage forage.

Ocala's normal highs top 90°F only from June through August, at about 91.0°F to 92.0°F, but May and September are close behind at about 88.9°F and 89.5°F.

Local building offices

Contact the office for your address to confirm what applies to your project.

Statewide reference: Florida Building Code Information System

Site references to look up for your Ocala address

The Ocala, FL metro area (Census CBSA 36100) covers a lot of ground, so look up the exact parcel rather than the city.

General planning reference from ASCE, USDA NRCS, FEMA and NOAA, retrieved October 25, 2026. Not a design value. Your engineer, builder and local authority set actual requirements.

Ocala climate at a glance

Ocala (cooperative station) (NOAA station USC00086414) averages 71.3°F over the year, with about 51.64 inches of precipitation, about 110 days at 90°F or hotter and about 8 nights at 32°F or colder.

General planning reference from NOAA NCEI U.S. Climate Normals 1991–2020, retrieved October 25, 2026. Not a design value. Your engineer, builder and local authority set actual requirements. NOAA NCEI U.S. Climate Normals (1991–2020)

Compared with the other 5 Florida metro areas in these guides, Ocala has the third-highest count of 90°F days (range 68 in Pensacola to 120 in Cape Coral–Fort Myers), the fourth-highest count of freezing nights and the fifth-highest yearly precipitation (48.31 inches in Gainesville to 68.31 in Pensacola).

Ocala month by month

MonthHigh °FLow °FRain, inDays ≥0.5 inDays ≥90°FNights ≤32°F
Jan70.645.63.42.303.4
Feb73.748.42.9201.9
Mar78.652.13.72.40.40.4
Apr83.957.42.21.63.80
May88.963.93.52.115.40
Jun9170.47.44.820.40
Jul9272.26.94.625.10
Aug91.672.57.1523.90
Sep89.570.36.53.917.60
Oct84.362.73.22.13.70
Nov77.253.52.11.40.10.4
Dec72.248.32.71.601.9

Ocala wettest: Jun (7.4 in). Ocala driest: Nov (2.1 in). May, Jun, Jul, Aug and Sep: 10+ days at 90°F each. No Ocala month averages 5 freezing nights. Jun–Sep deliver 27.9 of Ocala's 51.6 inches (54%). Ocala lows bottom out near 45.6°F in Jan; highs peak near 92°F in Jul. Roughly 15 Ocala days a year bring 1 inch or more.

NOAA normals, USC00086414, Ocala (cooperative station).

Counties, cities and towns in the Ocala metro area

The Ocala, FL metro area is Marion County, FL, with about 428,905 residents in July 2024. The price on this page is one figure for the whole metro area, so use the calculator if your site is far from the core.

Ocala places (5 incorporated, July 2024 residents within these counties): Ocala 70,251 (+10.3%); Belleview 6,156 (+11.6%); Dunnellon 2,043 (+5.5%); McIntosh 532 (+14.2%); Reddick 516 (+15.2%).

County2024 pop.Since 20201-unit homes authorized, 2025Farms, 2022Avg. farm acres
Marion County, FL428,905+14.1%5,4203,32987

Marion County authorized 5,420 single-unit homes in 2025 and grew +14.1% from April 2020 to July 2024. Among Ocala towns of 1,000+ people, Belleview grew fastest (5,518 to 6,156, +11.6%). The 2022 farm census counted 3,329 farms in Marion County; 2,628 of them (79%) had under 50 acres, averaging 87 acres overall; the count changed -16% from 2017. By use, Ocala farmland broke down as 50,315 acres of cropland, 134,013 of pasture and 61,951 of woodland, so pasture led.

Census city and town estimates; Census Building Permits Survey; USDA NASS county profiles; Census county estimates. Retrieved October 26, 2026.

Material suppliers near Ocala

Listed for reference, not an endorsement.

Office and supplier links checked October 25, 2026.

Common questions

How much does a 40×60 Barndominium Shell cost in Ocala, FL?

About $110,727 for a dried-in shell (structure, roof, walls and doors), built by a local crew. Interior finish, utilities and site work are not included. Roughly $48,293 for the materials kit alone. Most fair bids land between $94,118 and $132,872.

What drives the price up or down?

Site prep (slope, soil, driveway access), floor choice, doors and insulation, and local labor rates. Lumber and steel prices also move a few percent a year.

Do I need a permit?

Permit requirements vary by county and city. Check with your county or city building office before you build.

How do I make sure I'm getting a fair quote?

Get at least 3 itemized bids for the same spec. Compare them line by line against this breakdown and ask about anything far above or below it.

Is a 40×60 barndo shell in Marion County a good fit for a home plus barn?

Many owners split it into living space and a shop or barn area. The price here is for the shell only; finishing the living side is separate, so budget for both.

What should I ask about insulation for an Ocala barndominium?

Ask builders what the shell is prepared for (for example spray foam or a thermal break) and price insulation as its own line. Ocala's heat makes it a big part of comfort.

Estimate only. Actual prices vary. No guarantee or warranty. Use as a guide only. Read the full disclaimer

Related cost guides