Home › Cost guides › Florida › Tallahassee, FL

30×40 Pole Barn Cost in Tallahassee, FL (2026)

A 30×40 pole barn in Tallahassee, FL costs about $39,537 turnkey in 2026 ($32.95 per sq. ft.). Here's the itemized breakdown of materials, site prep and labor, using local crew rates. A 30×40 pole barn adds 1,200 square feet of shop, equipment or hay storage on a Leon, Gadsden or Wakulla County property.

Try another size or city Free. The numbers below update instantly.

30×40 ft, 12 ft walls (1,200 sq. ft.)

City or area

Get my spec sheet ($9.99)Change size, city or options (free calculator)

What does the $9.99 spec sheet add? ↓

Materials-Only Kit

$15,988

Delivered lumber, trusses, metal panels & hardware

= Rows 3–7 below, materials only

Concrete Slab & Site Prep

$8,816

Grading, forms, rebar & poured concrete floor

= Rows 1–2 below, installed price

Turnkey Installed Total

$39,537

$32.95 per sq. ft.

Complete build with a local licensed crew, materials & slab

= All rows below, installed price

Prices updated Oct 2026

A fair bid from a local builder in Tallahassee, FL should land between $33,606 and $47,444, about 15% below to 20% above this estimate. Quotes for the same building can vary widely, so get 3 quotes on the same spec. If one is outside this range, ask what it includes or leaves out.

Reference wind speed for this area: 118 mph (ASCE Hazard Tool value at the principal city, not a design value). Wind values here are reference figures for pricing. Confirm the design wind speed with your local building department or engineer.

Estimate only. Actual prices vary. No guarantee or warranty. Use as a guide only. Read the full disclaimer

Itemized cost breakdown

#	Item	Quantity	Materials	Labor	Installed
1	Site grading & building padLaser-leveled pad 2 ft past the walls, compacted fill	1,496 sq ft	$646	$901	$1,856
2	4" standard concrete slab3,500 PSI ready-mix, #4 rebar 18" grid, vapor barrier, forms	15.9 cu yd	$3,277	$2,523	$6,960
3	6×6 treated posts, girts & framing lumber18 posts × 16 ft (.60 CCA ground-contact), 2×6 girts at 2 ft incl. gable girts, 2×8 treated skirt board	18 posts + 888 lf	$3,384	$3,303	$8,024
4	30' engineered roof trusses & purlins11 trusses at 4 ft on center, standard wind allowance, 2×4 purlins at 2 ft (18 rows)	11 trusses + 756 lf	$3,361	$1,922	$6,340
5	29-ga metal roof & wall panels + trimPainted steel panels, ridge cap, corner/door/base trim, closures	31.5 squares	$4,223	$1,812	$7,242
6	Overhead & walk doorsDetails in the spec sheet	🔒 Included in $9.99 spec sheet	—	—	🔒
7	Screws, hardware & condensation barrierDetails in the spec sheet	🔒 Included in $9.99 spec sheet	—	—	🔒
8	Permit, stamped drawings & deliveryDetails in the spec sheet	🔒 Included in $9.99 spec sheet	—	—	🔒
	Turnkey total		$21,226	$11,722	$39,537

The totals above already include every row, including the 🔒 rows. The $9.99 spec sheet lists them item by item with quantities.

What do these terms mean?

Turnkey total: materials, site work and a crew to build it, all in one number.
29-ga metal: the steel panel thickness (a lower gauge number is thicker).
.60 CCA posts: treated posts rated to go in the ground.
Purlins and girts: boards across the roof and walls that the metal panels screw into.
PSI: a concrete strength rating.
#4 rebar: ½-inch steel bar laid in a grid inside the concrete.
Vapor barrier: plastic sheeting under the slab that keeps ground moisture out.

Adjust this estimate in the free calculator Save a free project request

Prices use 2026 material costs and typical local crew rates. Site work, custom options and material price swings can move your final price.

$9.99 one-time

Builder Spec Sheet & Shopping List

A sheet for comparing 3 builder bids line by line, and a builder-ready spec so every builder prices the same building.

Every line item on this page, including the 🔒 rows, in an editable Excel file and a PDF (spec, quantity, materials, labor and installed price)
A permit and site-prep checklist
A full itemized takeoff: panel cut lengths, trim, a fastener schedule, lumber counts and concrete yards, with the spacing rule and source for each line

30-day money-back.

Get my spec sheet ($9.99)

Free

Save a free project request

Tell us your ZIP and timeline. We aren't connecting requests with builders yet. No cost, no obligation.

Save my request

Planning a 30×40 pole barn in the Tallahassee area

A 30×40 pole barn suits a Big Bend homestead or small farm in Gadsden, Jefferson or rural Leon County, sized for a tractor, hay or a horse or two. Winter nights here can drop below freezing more often than further south in Florida, so ask about a vapor barrier under the roof steel to limit condensation.

Tallahassee averages about 103 days a year at 90°F or more and 27 freezing nights (NOAA 1991–2020, Tallahassee airport), a wider swing than most of Florida. Condensation under roof steel is worth asking about.
The airport averages about 59 inches of precipitation a year. Ask for gutters and a drainage plan around the pad.

Tallahassee versus the Florida statewide estimate

For a 30×40 pole barn, the Tallahassee estimate runs about 6% below the Florida statewide figure (both are estimates; bids set the real price). Tallahassee construction and extraction wages averaged about 79% of the U.S. mean in May 2025 (BLS OEWS), and Tallahassee goods prices sat near 96% of the U.S. level in 2024 (BEA RPP). That Tallahassee area factor applies fully to crew labor and partly to materials; the Florida statewide page uses an internal planning allowance instead.

Building around Tallahassee and the Big Bend

The Tallahassee metro area covers Leon, Gadsden, Wakulla and Jefferson counties. Tallahassee, with about 205,100 residents in July 2024, is by far the largest city. The smaller towns include Quincy, Midway, Chattahoochee, Monticello and Havana. Wakulla and Jefferson counties each grew nearly 10 percent from 2020 to 2024, while Leon grew about 3 percent.

Farms around Tallahassee tend to be large. Jefferson County farms averaged about 317 acres in 2022, and Leon County farms about 188. Jefferson ranked 11th in Florida for nursery and greenhouse sales and 13th for cattle and calves. Wakulla County authorized about 518 new single-unit homes in 2025, close to Leon's 617.

Tallahassee Regional Airport has the most freezing nights of the Florida metros in this group: about 10 in a typical January and 7 in December. It also averages about 7.8 inches of rain in June and 7.6 in August.

Tallahassee grew about 4.5 percent between April 2020 and July 2024, and Monticello about 6 percent, while Midway and Gretna changed little. Woodland is a large part of the farmland: Jefferson County farms included about 88,500 acres of woodland in 2022 and Leon County farms about 44,300. Gadsden County authorized about 44 new single-unit homes in 2025 and Jefferson about 55.

Winter matters more here than in the other Florida metros in these guides. Tallahassee Regional Airport averages about 27 nights a year at or below 32°F, including about 5.2 in February and 2.1 in March, and normal January lows near 40.5°F. Summer is as hot as central Florida, with about 25 days at 90°F or hotter in July. March is wetter than April or May, at about 5.2 inches.

Leon County farms held about 1,940 cattle and calves and 460 horses and ponies in 2022, and reported about 5,400 acres of hay and haylage forage.

Local building offices

Contact the office for your address to confirm what applies to your project.

City of Tallahassee Building Inspection (Growth Management) (the City of Tallahassee)
Leon County Building Plans Review and Inspection (unincorporated Leon County)

The metro also includes Gadsden, Jefferson and Wakulla counties. For a property there, contact that county or the city it sits in.

Statewide reference: Florida Building Code Information System

Site references to look up for your Tallahassee address

The Tallahassee, FL metro area (Census CBSA 45220) covers a lot of ground, so look up the exact parcel rather than the city.

ASCE Hazard Tool: wind, snow and other site loads for the Tallahassee-area parcel
USDA NRCS Web Soil Survey: the soil map units under your Tallahassee site, including shrink-swell ratings
FEMA Flood Map Service Center: the flood zone for your Tallahassee address
NOAA Storm Prediction Center: severe-weather background for the Big Bend
NOAA National Hurricane Center: tropical storm and hurricane background for the Tallahassee area

General planning reference from ASCE, USDA NRCS, FEMA and NOAA, retrieved October 26, 2026. Not a design value. Your engineer, builder and local authority set actual requirements.

Tallahassee climate at a glance

Tallahassee Regional Airport (NOAA station USW00093805) averages 68.4°F over the year, with about 58.81 inches of precipitation, about 103 days at 90°F or hotter and about 27 nights at 32°F or colder.

General planning reference from NOAA NCEI U.S. Climate Normals 1991–2020, retrieved October 26, 2026. Not a design value. Your engineer, builder and local authority set actual requirements. NOAA NCEI U.S. Climate Normals (1991–2020)

Compared with the other 5 Florida metro areas in these guides, Tallahassee has the fourth-highest count of 90°F days (range 68 in Pensacola to 120 in Cape Coral–Fort Myers), the highest count of freezing nights and the second-highest yearly precipitation (48.31 inches in Gainesville to 68.31 in Pensacola).

Tallahassee month by month

Month	High °F	Low °F	Rain, in	Days ≥0.5 in	Days ≥90°F	Nights ≤32°F
Jan	63.9	40.5	4.4	2.9	0	9.6
Feb	67.8	43.5	4.3	2.7	0	5.2
Mar	74.2	48.6	5.2	3.1	0	2.1
Apr	80.2	54.4	3.5	2.3	1.4	0.2
May	87.4	63	3.4	2.1	12.9	0
Jun	90.8	70.8	7.8	4.6	20.1	0
Jul	92.1	73	7.1	4.8	24.8	0
Aug	91.5	73.2	7.6	5	23.8	0
Sep	88.6	69.6	4.9	3.2	16.6	0
Oct	81.7	58.8	3.2	1.9	3	0.1
Nov	72.5	48	3.1	2.1	0	2.3
Dec	65.9	42.9	4.2	2.4	0	7.4

Tallahassee wettest: Jun (7.8 in). Tallahassee driest: Nov (3.1 in). May, Jun, Jul, Aug and Sep: 10+ days at 90°F each. Jan, Feb and Dec: 5+ freezing nights each. Jun–Sep deliver 27.4 of Tallahassee's 58.8 inches (47%). Tallahassee lows bottom out near 40.5°F in Jan; highs peak near 92.1°F in Jul. Roughly 17 Tallahassee days a year bring 1 inch or more.

NOAA normals, USW00093805, Tallahassee Regional Airport.

Counties, cities and towns in the Tallahassee metro area

The Tallahassee, FL metro area had about 397,675 residents in July 2024, across 4 counties. The price on this page is one figure for the whole metro area, so use the calculator if your site is far from the core.

Tallahassee places (10 incorporated, July 2024 residents within these counties): Tallahassee 205,089 (+4.5%); Quincy 8,119 (+1.1%); Midway 3,485 (−1.8%); Chattahoochee 3,028 (+2.3%); Monticello 2,754 (+6.3%); Havana 1,756 (+0.1%); Gretna 1,284 (−0.2%); Sopchoppy 476 (+12.8%); Greensboro 464 (+0.9%); St. Marks 312 (+12.6%).

County	2024 pop.	Since 2020	1-unit homes authorized, 2025	Farms, 2022	Avg. farm acres
Leon County, FL	300,488	+2.8%	617	372	188
Gadsden County, FL	44,151	+0.8%	44	489	146
Wakulla County, FL	37,115	+9.9%	518	255	n/a
Jefferson County, FL	15,921	+9.7%	55	597	317

Tallahassee counties authorized 1,234 single-unit homes in 2025, led by Leon County (617) and Wakulla County (518). Wakulla County grew fastest from April 2020 to July 2024 (+9.9%); the lowest was Gadsden County (+0.8%). Among Tallahassee towns of 1,000+ people, Monticello grew fastest (2,591 to 2,754, +6.3%). The 2022 farm census counted 1,713 farms in Tallahassee's 4 counties; 979 of them (57%) had under 50 acres, and Jefferson County had the most (597, averaging 317 acres). By use, Tallahassee farmland broke down as 72,617 acres of cropland, 51,204 of pasture and 165,258 of woodland (some county figures withheld), so woodland led.

Census city and town estimates; Census Building Permits Survey; USDA NASS county profiles; Census county estimates. Retrieved October 26, 2026.

Material suppliers near Tallahassee

Listed for reference, not an endorsement.

GMC Metal Roofing Supply: metal roofing and building panels (Marpan Ln, Tallahassee, per its website)
Tri County Metals – Tallahassee: metal roofing and building panels
Builders FirstSource – Tallahassee lumber yard: lumber and building materials

Office and supplier links checked October 26, 2026.

Common questions

How much does a 30×40 Pole Barn cost in Tallahassee, FL?

About $39,537 fully built by a local crew in 2026, or roughly $15,988 for the materials kit alone. Most fair bids land between $33,606 and $47,444.

What drives the price up or down?

Site prep (slope, soil, driveway access), floor choice, doors and insulation, and local labor rates. Lumber and steel prices also move a few percent a year.

Do I need a permit?

Permit requirements vary by county and city. Check with your county or city building office before you build.

How do I make sure I'm getting a fair quote?

Get at least 3 itemized bids for the same spec. Compare them line by line against this breakdown and ask about anything far above or below it.

Is condensation a problem in a Tallahassee pole barn?

It can be, because cold nights follow humid days. Ask builders to quote a vapor barrier or condensation blanket under the roof steel as a separate line.

Where can I buy pole barn materials in Tallahassee?

GMC Metal Roofing Supply on Marpan Lane and Tri County Metals' Tallahassee branch sell metal panels and trim, and Builders FirstSource has a Tallahassee lumber yard. They are listed below for reference, not as an endorsement.