Free cost calculator

Home › Cost guides › North Carolina › Raleigh, NC

24×36 Standing Seam Metal Roof Cost in Raleigh, NC (2026)

A 24×36 standing seam metal roof in Raleigh, NC costs about $18,478 turnkey in 2026 ($14.53 per sq. ft. of roof). Here's the itemized breakdown of materials, site prep and labor, using local crew rates.

Try another size or city Free. The numbers below update instantly.

1,271 sq. ft. of roof · 24-ga standing seam (standard finish)

Get my spec sheet ($9.99)Change size, city or options (free calculator)
What does the $9.99 spec sheet add? ↓
Metal Roofing Materials
$8,404
24-ga standing seam panels, trim, underlayment & clips
= Rows 3–7 below, materials only
Tear-Off & Deck Prep
$1,914
Remove old roof, haul-off & deck repairs
= Rows 1–2 below, installed price
Turnkey Installed Total
$18,478
$14.53 per sq. ft. of roof
Complete re-roof by a local licensed roofer
= All rows below, installed price

Prices updated Oct 2026

A fair bid from a local builder in Raleigh, NC should land between $15,706 and $22,174, about 15% below to 20% above this estimate. Quotes for the same building can vary widely, so get 3 quotes on the same spec. If one is outside this range, ask what it includes or leaves out.

Estimate only. Actual prices vary. No guarantee or warranty. Use as a guide only. Read the full disclaimer

Itemized cost breakdown

#ItemQuantityMaterialsLaborInstalled
1Tear-off & disposal (1 layer)Remove shingles & felt, dumpster, magnet sweep12.7 squares$401$950$1,621
2Roof deck repair allowanceReplace up to 8% of decking, re-nail to code4 sheets$95$149$293
3High-temp synthetic underlaymentIce & water shield at eaves/valleys + synthetic field12.7 squares$527$405$1,118
424-ga standing seam panels16" wide panels, mechanical seam, SMP finish12.7 squares$5,833$3,526$11,231
5Ridge, eave, rake & valley trimMatching trim, Z-closures, flashing168 lf$1,243$715$2,350
6Panel clips, pancake screws & sealantDetails in the spec sheet🔒 Included in $9.99 spec sheet——🔒
7Pipe boots, vented ridge & chimney flashingDetails in the spec sheet🔒 Included in $9.99 spec sheet——🔒
8Permit & final inspectionDetails in the spec sheet🔒 Included in $9.99 spec sheet——🔒
Turnkey total$9,176$6,268$18,478

The totals above already include every row, including the 🔒 rows. The $9.99 spec sheet lists them item by item with quantities.

What do these terms mean?
  • Turnkey total: materials, site work and a crew to build it, all in one number.
  • 29-ga metal: the steel panel thickness (a lower gauge number is thicker).
Adjust this estimate in the free calculatorSave a free project request

Prices use 2026 material costs and typical local crew rates. Site work, custom options and material price swings can move your final price.

$9.99 one-time

Builder Spec Sheet & Shopping List

A sheet for comparing 3 builder bids line by line, and a builder-ready spec so every builder prices the same building.

  • Every line item on this page, including the 🔒 rows, in an editable Excel file and a PDF (spec, quantity, materials, labor and installed price)
  • A permit and site-prep checklist

30-day money-back.

Get my spec sheet ($9.99)
Free

Save a free project request

Tell us your ZIP and timeline. We aren't connecting requests with builders yet. No cost, no obligation.

Save my request

Common questions

How much does a 24×36 Standing Seam Metal Roof cost in Raleigh, NC?

About $18,478 fully built by a local crew in 2026, or roughly $8,404 for the materials kit alone. Most fair bids land between $15,706 and $22,174.

What drives the price up or down?

Site prep (slope, soil, driveway access), floor choice, doors and insulation, and local labor rates. Lumber and steel prices also move a few percent a year.

Do I need a permit?

Permit requirements vary by county and city. Check with your county or city building office before you build.

How do I make sure I'm getting a fair quote?

Get at least 3 itemized bids for the same spec. Compare them line by line against this breakdown and ask about anything far above or below it.

Related cost guides