Free cost calculator

Home › Cost guides › Alabama › Decatur & Cullman, AL

24×36 Standing Seam Metal Roof Cost in Decatur & Cullman, AL (2026)

A 24×36 standing seam metal roof in Decatur & Cullman, AL costs about $18,406 turnkey in 2026 ($14.48 per sq. ft. of roof). Here's the itemized breakdown of materials, site prep and labor, using local crew rates.

Request free local quotesCustomize this estimate
Metal Roofing Materials
$8,365
24-ga standing seam panels, trim, underlayment & clips
= Rows 3–7 below, materials only
Tear-Off & Deck Prep
$1,898
Remove old roof, haul-off & deck repairs
= Rows 1–2 below, installed price
Turnkey Installed Total
$18,406
$14.48 per sq. ft. of roof
Complete re-roof by a local licensed roofer
= All rows below, installed price
A fair bid from a local builder in Decatur & Cullman, AL should land between $16,934 and $20,247. Get 3 quotes, and if one is far outside this range, ask why.

Estimate only. Actual prices vary. No guarantee or warranty. Use as a guide only. Read the full disclaimer

Itemized cost breakdown

#ItemQuantityMaterialsLaborInstalled
1Tear-off & disposal (1 layer)Remove shingles & felt, dumpster, magnet sweep12.7 squares$400$940$1,608
2Roof deck repair allowanceReplace up to 8% of decking, re-nail to code4 sheets$94$148$290
3High-temp synthetic underlaymentIce & water shield at eaves/valleys + synthetic field12.7 squares$524$401$1,110
424-ga standing seam panels16" wide panels, mechanical seam, SMP finish12.7 squares$5,806$3,490$11,155
5Ridge, eave, rake & valley trimMatching trim, Z-closures, flashing168 lf$1,237$708$2,334
6Panel clips, pancake screws & sealantDetails in the spec sheet🔒 Included in $19 spec sheet$350$201$661
7Pipe boots, vented ridge & chimney flashingDetails in the spec sheet🔒 Included in $19 spec sheet$448$317$918
8Permit & final inspectionDetails in the spec sheet🔒 Included in $19 spec sheet$275$0$330
Turnkey total$9,134$6,205$18,406
Customize this estimate (free)Request free local quotes

Prices use 2026 material costs and typical local crew rates. Site work, custom options and material price swings can move your final price.

$19 one-time

Builder Spec Sheet & Shopping List

The same line items as this page in an editable Excel file and a PDF, each with a short spec, quantity, materials, labor and installed price. Plus a permit and site-prep checklist and a sheet for comparing 3 builder bids. 30-day money-back guarantee.

Get my spec pack
Free

Request free local quotes

Tell us your ZIP and timeline. We'll match your request with local builders who serve your area as they join our network. No cost, no obligation.

Request free quotes

Common questions

How much does a 24×36 Standing Seam Metal Roof cost in Decatur & Cullman, AL?

About $18,406 fully built by a local crew in 2026, or roughly $8,365 for the materials kit alone. Most fair bids land between $16,934 and $20,247.

What drives the price up or down?

Site prep (slope, soil, driveway access), floor choice, doors and insulation, and local labor rates. Lumber and steel prices also move a few percent a year.

Do I need a permit?

Most counties require a building permit for structures over 200 sq ft. Call your county building department with your size and location before you order materials.

How do I make sure I'm getting a fair quote?

Get at least 3 itemized bids for the same spec. Compare them line by line against this breakdown and ask about anything far above or below it.

Related cost guides