Free cost calculator

Home › Cost guides › Alabama › Auburn & Opelika, AL

24×36 Standing Seam Metal Roof Cost in Auburn & Opelika, AL (2026)

A 24×36 standing seam metal roof in Auburn & Opelika, AL costs about $17,514 turnkey in 2026 ($13.77 per sq. ft. of roof). Here's the itemized breakdown of materials, site prep and labor, using local crew rates.

Request free local quotesCustomize this estimate
Metal Roofing Materials
$8,098
24-ga standing seam panels, trim, underlayment & clips
= Rows 3–7 below, materials only
Tear-Off & Deck Prep
$1,784
Remove old roof, haul-off & deck repairs
= Rows 1–2 below, installed price
Turnkey Installed Total
$17,514
$13.77 per sq. ft. of roof
Complete re-roof by a local licensed roofer
= All rows below, installed price
A fair bid from a local builder in Auburn & Opelika, AL should land between $16,113 and $19,265. Get 3 quotes, and if one is far outside this range, ask why.

Estimate only. Actual prices vary. No guarantee or warranty. Use as a guide only. Read the full disclaimer

Itemized cost breakdown

#ItemQuantityMaterialsLaborInstalled
1Tear-off & disposal (1 layer)Remove shingles & felt, dumpster, magnet sweep12.7 squares$387$871$1,510
2Roof deck repair allowanceReplace up to 8% of decking, re-nail to code4 sheets$91$137$274
3High-temp synthetic underlaymentIce & water shield at eaves/valleys + synthetic field12.7 squares$508$372$1,056
424-ga standing seam panels16" wide panels, mechanical seam, SMP finish12.7 squares$5,620$3,236$10,627
5Ridge, eave, rake & valley trimMatching trim, Z-closures, flashing168 lf$1,198$656$2,225
6Panel clips, pancake screws & sealantDetails in the spec sheet🔒 Included in $19 spec sheet$338$186$629
7Pipe boots, vented ridge & chimney flashingDetails in the spec sheet🔒 Included in $19 spec sheet$434$294$874
8Permit & final inspectionDetails in the spec sheet🔒 Included in $19 spec sheet$266$0$319
Turnkey total$8,842$5,752$17,514
Customize this estimate (free)Request free local quotes

Prices use 2026 material costs and typical local crew rates. Site work, custom options and material price swings can move your final price.

$19 one-time

Builder Spec Sheet & Shopping List

The same line items as this page in an editable Excel file and a PDF, each with a short spec, quantity, materials, labor and installed price. Plus a permit and site-prep checklist and a sheet for comparing 3 builder bids. 30-day money-back guarantee.

Get my spec pack
Free

Request free local quotes

Tell us your ZIP and timeline. We'll match your request with local builders who serve your area as they join our network. No cost, no obligation.

Request free quotes

Common questions

How much does a 24×36 Standing Seam Metal Roof cost in Auburn & Opelika, AL?

About $17,514 fully built by a local crew in 2026, or roughly $8,098 for the materials kit alone. Most fair bids land between $16,113 and $19,265.

What drives the price up or down?

Site prep (slope, soil, driveway access), floor choice, doors and insulation, and local labor rates. Lumber and steel prices also move a few percent a year.

Do I need a permit?

Most counties require a building permit for structures over 200 sq ft. Call your county building department with your size and location before you order materials.

How do I make sure I'm getting a fair quote?

Get at least 3 itemized bids for the same spec. Compare them line by line against this breakdown and ask about anything far above or below it.

Related cost guides