Free cost calculator

Home › Cost guides › Vermont › Metal Roof Replacement

Metal Roof Replacement Cost in Vermont (2026)

Typical price for a 1,800 sq ft home (about 25 squares) re-roofed with 24-gauge standing seam in Vermont: about $35,272 installed. Use the free itemized estimate below to check contractor quotes.

Request free local quotesCustomize this estimate
Metal Roofing Materials
$15,848
24-ga standing seam panels, trim, underlayment & clips
= Rows 3–7 below, materials only
Tear-Off & Deck Prep
$3,881
Remove old roof, haul-off & deck repairs
= Rows 1–2 below, installed price
Turnkey Installed Total
$35,272
Complete re-roof by a local licensed roofer
= All rows below, installed price
A fair bid from a local builder in Vermont should land between $32,450 and $38,799. Get 3 quotes, and if one is far outside this range, ask why.

Estimate only. Actual prices vary. No guarantee or warranty. Use as a guide only. Read the full disclaimer

Itemized cost breakdown

#ItemQuantityMaterialsLaborInstalled
1Tear-off & disposal (1 layer)Remove shingles & felt, dumpster, magnet sweep25.0 squares$809$1,977$3,343
2Roof deck repair allowanceReplace up to 8% of decking, re-nail to code7 sheets$170$278$538
3High-temp synthetic underlaymentIce & water shield at eaves/valleys + synthetic field25.0 squares$1,062$850$2,294
424-ga standing seam panels16" wide panels, mechanical seam, SMP finish25.0 squares$11,762$7,353$22,938
5Ridge, eave, rake & valley trimMatching trim, Z-closures, flashing234 lf$1,779$1,059$3,406
6Panel clips, pancake screws & sealantDetails in the spec sheet🔒 Included in $19 spec sheet$708$425$1,360
7Pipe boots, vented ridge & chimney flashingDetails in the spec sheet🔒 Included in $19 spec sheet$537$340$1,052
8Permit & final inspectionDetails in the spec sheet🔒 Included in $19 spec sheet$284$0$341
Turnkey total$17,111$12,282$35,272
Customize this estimate (free)Request free local quotes

Prices use 2026 material costs and typical local crew rates. Site work, custom options and material price swings can move your final price.

$19 one-time

Builder Spec Sheet & Shopping List

The same line items as this page in an editable Excel file and a PDF, each with a short spec, quantity, materials, labor and installed price. Plus a permit and site-prep checklist and a sheet for comparing 3 builder bids. 30-day money-back guarantee.

Get my spec pack
Free

Request free local quotes

Tell us your ZIP and timeline. We'll match your request with local builders who serve your area as they join our network. No cost, no obligation.

Request free quotes

Common questions

How much does metal roof replacement cost in Vermont?

For a 1,800 sq ft home (about 25 squares) re-roofed with 24-gauge standing seam, expect about $35,272 with a local pro in 2026. Fair quotes usually fall between $32,450 and $38,799.

Is this a free estimate template?

Yes. The breakdown on this page is free. The $19 Spec Pack puts these same line items in an editable Excel file and a PDF spec sheet you can hand to contractors, plus a permit checklist and a bid-comparison sheet.

How do I compare contractor quotes?

Ask each contractor to price the same scope, then compare their numbers line by line against this breakdown. A quote far below the range often leaves something out.

Related cost guides