Free cost calculator

Home › Cost guides › Kentucky › House & Driveway Pressure Washing

House & Driveway Pressure Washing Cost in Kentucky (2026)

Typical price for a 3,500 sq ft house soft-wash plus a 1,000 sq ft driveway and walks in Kentucky: about $1,152 installed. Use the free itemized estimate below to check contractor quotes.

Request free local quotesCustomize this estimate
Materials & Supplies
$208
Paint, sod, chemicals or supplies for the job
= Rows 4–7 below, materials only
Prep & Site Work
$178
Prep work, protection and setup
= Rows 1–3 below, installed price
Turnkey Installed Total
$1,152
Complete job by a local pro
= All rows below, installed price
A fair bid from a local builder in Kentucky should land between $1,060 and $1,267. Get 3 quotes, and if one is far outside this range, ask why.

Estimate only. Actual prices vary. No guarantee or warranty. Use as a guide only. Read the full disclaimer

Itemized cost breakdown

#ItemQuantityMaterialsLaborInstalled
1Windows & screens rinseSpot-free rinse after washAllowance$10$51$73
2Plant & fixture protectionPre-wet and cover plants, protect lights and outletsAllowance$19$25$53
3Water, fuel & surfactantChemicals, fuel and water usageAllowance$43$0$52
4House soft-wash (siding, soffits, eaves)Low-pressure bleach-free soft wash, rinse3,500 sq ft$92$253$414
5Driveway & sidewalk surface cleaningRotary surface cleaner, 3,000+ PSI hot or cold1,000 sq ft$24$152$211
6Pre-treat & post-treat (oil, rust, mildew)Details in the spec sheet🔒 Included in $19 spec sheet$63$51$137
7Gutter exterior brighteningDetails in the spec sheet🔒 Included in $19 spec sheet$29$76$126
8Trip charge & equipmentDetails in the spec sheet🔒 Included in $19 spec sheet$72$0$86
Turnkey total$352$608$1,152
Customize this estimate (free)Request free local quotes

Prices use 2026 material costs and typical local crew rates. Site work, custom options and material price swings can move your final price.

$19 one-time

Builder Spec Sheet & Shopping List

The same line items as this page in an editable Excel file and a PDF, each with a short spec, quantity, materials, labor and installed price. Plus a permit and site-prep checklist and a sheet for comparing 3 builder bids. 30-day money-back guarantee.

Get my spec pack
Free

Request free local quotes

Tell us your ZIP and timeline. We'll match your request with local builders who serve your area as they join our network. No cost, no obligation.

Request free quotes

Common questions

How much does house & driveway pressure washing cost in Kentucky?

For a 3,500 sq ft house soft-wash plus a 1,000 sq ft driveway and walks, expect about $1,152 with a local pro in 2026. Fair quotes usually fall between $1,060 and $1,267.

Is this a free estimate template?

Yes. The breakdown on this page is free. The $19 Spec Pack puts these same line items in an editable Excel file and a PDF spec sheet you can hand to contractors, plus a permit checklist and a bid-comparison sheet.

How do I compare contractor quotes?

Ask each contractor to price the same scope, then compare their numbers line by line against this breakdown. A quote far below the range often leaves something out.

Related cost guides