Free cost calculator

Home › Cost guides › Maryland › 200-Amp Panel Upgrade

200-Amp Panel Upgrade Cost in Maryland (2026)

Typical price for a 1,800 sq ft home upgraded to a new 200-amp panel and meter base in Maryland: about $4,281 installed. Use the free itemized estimate below to check contractor quotes.

Request free local quotesCustomize this estimate
Panel & Materials
$1,874
200A panel, breakers, meter base & grounding
= Rows 3–7 below, materials only
Utility & Hookup
$372
Power company disconnect/reconnect & fittings
= Rows 1–2 below, installed price
Turnkey Installed Total
$4,281
Complete upgrade by a licensed electrician
= All rows below, installed price
A fair bid from a local builder in Maryland should land between $3,939 and $4,709. Get 3 quotes, and if one is far outside this range, ask why.

Estimate only. Actual prices vary. No guarantee or warranty. Use as a guide only. Read the full disclaimer

Itemized cost breakdown

#ItemQuantityMaterialsLaborInstalled
1Utility disconnect / reconnectPower company coordination & meter pull1$0$117$140
2Misc. fittings, connectors & labelingConnectors, knockout seals, anti-oxidant, labelsSummary fastener and parts allowance$164$29$232
3200A main breaker panel (40-space)Indoor load center with main breaker1 panel$431$350$937
4Breakers (AFCI/GFCI where required)20 circuits moved, code-required AFCI/GFCI20 breakers$698$292$1,188
5200A meter base & service entrance cableRingless meter base, 4/0 aluminum SE cable1 meter base + 30 ft$575$292$1,040
6Grounding & bondingDetails in the spec sheet🔒 Included in $19 spec sheet$144$117$313
7Panel labeling & circuit tracingDetails in the spec sheet🔒 Included in $19 spec sheet$26$87$136
8Permit & inspectionDetails in the spec sheet🔒 Included in $19 spec sheet$246$0$295
Turnkey total$2,284$1,284$4,281
Customize this estimate (free)Request free local quotes

Prices use 2026 material costs and typical local crew rates. Site work, custom options and material price swings can move your final price.

$19 one-time

Builder Spec Sheet & Shopping List

The same line items as this page in an editable Excel file and a PDF, each with a short spec, quantity, materials, labor and installed price. Plus a permit and site-prep checklist and a sheet for comparing 3 builder bids. 30-day money-back guarantee.

Get my spec pack
Free

Request free local quotes

Tell us your ZIP and timeline. We'll match your request with local builders who serve your area as they join our network. No cost, no obligation.

Request free quotes

Common questions

How much does 200-amp panel upgrade cost in Maryland?

For a 1,800 sq ft home upgraded to a new 200-amp panel and meter base, expect about $4,281 with a local pro in 2026. Fair quotes usually fall between $3,939 and $4,709.

Is this a free estimate template?

Yes. The breakdown on this page is free. The $19 Spec Pack puts these same line items in an editable Excel file and a PDF spec sheet you can hand to contractors, plus a permit checklist and a bid-comparison sheet.

How do I compare contractor quotes?

Ask each contractor to price the same scope, then compare their numbers line by line against this breakdown. A quote far below the range often leaves something out.

Related cost guides