Free cost calculator

Home › Cost guides › Alabama › Gadsden, AL

200-Amp Panel Upgrade Cost in Gadsden, AL (2026)

Typical price for a 1,800 sq ft home upgraded to a new 200-amp panel and meter base in Gadsden, AL: about $3,624 installed. Use the free itemized estimate below to check contractor quotes.

Request free local quotesCustomize this estimate
Panel & Materials
$1,685
200A panel, breakers, meter base & grounding
= Rows 3–7 below, materials only
Utility & Hookup
$314
Power company disconnect/reconnect & fittings
= Rows 1–2 below, installed price
Turnkey Installed Total
$3,624
Complete upgrade by a licensed electrician
= All rows below, installed price

Prices updated Oct 2026

A fair bid from a local builder in Gadsden, AL should land between $3,080 and $4,349, about 15% below to 20% above this estimate. Quotes for the same building can vary widely, so get 3 quotes on the same spec. If one is outside this range, ask what it includes or leaves out.

Estimate only. Actual prices vary. No guarantee or warranty. Use as a guide only. Read the full disclaimer

Itemized cost breakdown

#ItemQuantityMaterialsLaborInstalled
1Utility disconnect / reconnectPower company coordination & meter pull1$0$91$109
2Misc. fittings, connectors & labelingConnectors, knockout seals, anti-oxidant, labelsSummary fastener and parts allowance$148$23$205
3200A main breaker panel (40-space)Indoor load center with main breaker1 panel$388$274$794
4Breakers (AFCI/GFCI where required)20 circuits moved, code-required AFCI/GFCI20 breakers$628$228$1,027
5200A meter base & service entrance cableRingless meter base, 4/0 aluminum SE cable1 meter base + 30 ft$517$228$894
6Grounding & bondingDetails in the spec sheet🔒 Included in $19 spec sheet——🔒
7Panel labeling & circuit tracingDetails in the spec sheet🔒 Included in $19 spec sheet——🔒
8Permit & inspectionDetails in the spec sheet🔒 Included in $19 spec sheet——🔒
Turnkey total$2,055$1,003$3,624
Customize this estimate (free)Request free local quotes

Prices use 2026 material costs and typical local crew rates. Site work, custom options and material price swings can move your final price.

$19 one-time

Builder Spec Sheet & Shopping List

A sheet for comparing 3 builder bids line by line, and a builder-ready spec so every builder prices the same building. Plus the same line items as this page in an editable Excel file and a PDF (spec, quantity, materials, labor and installed price) and a permit and site-prep checklist. 30-day money-back.

Get my spec pack
Free

Request free local quotes

Tell us your ZIP and timeline. We're still adding builders in your area; we'll connect you when one is available. No cost, no obligation.

Request free quotes

Common questions

How much does 200-amp panel upgrade cost in Gadsden, AL?

For a 1,800 sq ft home upgraded to a new 200-amp panel and meter base, expect about $3,624 with a local pro in 2026. Fair quotes usually fall between $3,080 and $4,349.

Is this a free estimate template?

Yes. The breakdown on this page is free. The $19 Spec Pack puts these same line items in an editable Excel file and a PDF spec sheet you can hand to contractors, plus a permit checklist and a bid-comparison sheet.

How do I compare contractor quotes?

Ask each contractor to price the same scope, then compare their numbers line by line against this breakdown. A quote far below the range often leaves something out.

Related cost guides