Free cost calculator

Home › Cost guides › North Dakota › Concrete Slab & Flatwork

Concrete Slab & Flatwork Cost in North Dakota (2026)

Typical price for a 30×40 (1,200 sq ft) 4-inch reinforced slab in North Dakota: about $11,396 installed. Use the free itemized estimate below to check contractor quotes.

Request free local quotesCustomize this estimate
Concrete & Rebar Materials
$3,966
Ready-mix concrete, rebar, forms & vapor barrier
= Rows 3–6 below, materials only
Excavation & Gravel Base
$2,515
Grading, haul-off & compacted stone base
= Rows 1–2 below, installed price
Turnkey Installed Total
$11,396
Formed, poured & finished by a local concrete crew
= All rows below, installed price
A fair bid from a local builder in North Dakota should land between $10,484 and $12,536. Get 3 quotes, and if one is far outside this range, ask why.

Estimate only. Actual prices vary. No guarantee or warranty. Use as a guide only. Read the full disclaimer

Itemized cost breakdown

#ItemQuantityMaterialsLaborInstalled
1Excavation & gradingStrip topsoil, cut/fill to grade, haul-off1,480 sq ft$509$586$1,314
2Compacted gravel base (4")Crushed stone, plate-compacted20.7 tons$610$391$1,201
34" ready-mix concrete (3,500 PSI)Includes 5% waste and thickened edges19.2 cu yd$2,376$0$2,851
4#4 rebar grid (18" on center) & chairsTied rebar on chairs, dowels at doors1,760 lf$951$665$1,939
5Forms, pour & finish laborSet forms, place, power-trowel finish, cure1,200 sq ft$344$1,959$2,764
6Vapor barrier & control jointsDetails in the spec sheet🔒 Included in $19 spec sheet$295$312$728
7Concrete pump (trailer-mounted)Details in the spec sheet🔒 Included in $19 spec sheet$283$0$340
8Permit & inspection (if required)Details in the spec sheet🔒 Included in $19 spec sheet$216$0$259
Turnkey total$5,584$3,913$11,396
Customize this estimate (free)Request free local quotes

Prices use 2026 material costs and typical local crew rates. Site work, custom options and material price swings can move your final price.

$19 one-time

Builder Spec Sheet & Shopping List

The same line items as this page in an editable Excel file and a PDF, each with a short spec, quantity, materials, labor and installed price. Plus a permit and site-prep checklist and a sheet for comparing 3 builder bids. 30-day money-back guarantee.

Get my spec pack
Free

Request free local quotes

Tell us your ZIP and timeline. We'll match your request with local builders who serve your area as they join our network. No cost, no obligation.

Request free quotes

Common questions

How much does concrete slab & flatwork cost in North Dakota?

For a 30×40 (1,200 sq ft) 4-inch reinforced slab, expect about $11,396 with a local pro in 2026. Fair quotes usually fall between $10,484 and $12,536.

Is this a free estimate template?

Yes. The breakdown on this page is free. The $19 Spec Pack puts these same line items in an editable Excel file and a PDF spec sheet you can hand to contractors, plus a permit checklist and a bid-comparison sheet.

How do I compare contractor quotes?

Ask each contractor to price the same scope, then compare their numbers line by line against this breakdown. A quote far below the range often leaves something out.

Related cost guides