Home › Cost guides › New Mexico › 50×80 Pole Barn
50×80 Pole Barn Cost in New Mexico (2026)
A 50×80 pole barn in New Mexico costs about $108,598 turnkey in 2026 ($27.15 per sq. ft.). Here's the itemized breakdown of materials, site prep and labor, using local crew rates.
Estimate only. Actual prices vary. No guarantee or warranty. Use as a guide only. Read the full disclaimer
Itemized cost breakdown
| # | Item | Quantity | Installed |
|---|---|---|---|
| 1 | Site grading & building padLaser-leveled pad 2 ft past the walls, compacted fill | 4,536 sq ft | $5,804 |
| 2 | 4" standard concrete slab3,500 PSI ready-mix, #4 rebar 18" grid, vapor barrier, forms | 52.8 cu yd | $23,848 |
| 3 | 6×6 treated posts, girts & framing lumber34 posts × 20 ft (.60 CCA ground-contact), 2×6 girts, 2×8 treated skirt board | 34 posts + 2,340 lf | $23,622 |
| 4 | 50' engineered roof trusses & purlins21 trusses at 4 ft on center, 115 mph rated, 2×4 purlins | 21 trusses + 2,050 lf | $20,734 |
| 5 | 29-ga metal roof & wall panels + trimPainted steel panels, ridge cap, corner/door/base trim, closures | 87.9 squares | $20,050 |
| 6 | Overhead & walk doorsDetails in the spec sheet | 🔒 Included in $19 spec sheet | $5,070 |
| 7 | Screws, hardware & condensation barrierDetails in the spec sheet | 🔒 Included in $19 spec sheet | $6,714 |
| 8 | Permit, stamped drawings & deliveryDetails in the spec sheet | 🔒 Included in $19 spec sheet | $2,756 |
| Turnkey total | $108,598 |
Prices use 2026 material costs and typical local crew rates. Site work, custom options and material price swings can move your final price.
Builder Spec Sheet & Shopping List
The same line items as this page in an editable Excel file and a PDF, each with a short spec, quantity, materials, labor and installed price. Plus a permit and site-prep checklist and a sheet for comparing 3 builder bids. 30-day money-back guarantee.
Get my spec packRequest free local quotes
Tell us your ZIP and timeline. We'll match your request with local builders who serve your area as they join our network. No cost, no obligation.
Request free quotesCommon questions
How much does a 50×80 Pole Barn cost in New Mexico?
About $108,598 fully built by a local crew in 2026, or roughly $37,831 for the materials kit alone. Most fair bids land between $99,910 and $119,458.
What drives the price up or down?
Site prep (slope, soil, driveway access), floor choice, doors and insulation, and local labor rates. Lumber and steel prices also move a few percent a year.
Do I need a permit?
Most counties require a building permit for structures over 200 sq ft. Call your county building department with your size and location before you order materials.
How do I make sure I'm getting a fair quote?
Get at least 3 itemized bids for the same spec. Compare them line by line against this breakdown and ask about anything far above or below it.
Related cost guides
- Pole Barn Framing & Erection cost in New Mexico
- 50×80 Pole Barn cost in every state
- All New Mexico cost guides
- 24×24 Pole Barn cost in New Mexico
- 30×40 Pole Barn cost in New Mexico
- 40×60 Pole Barn cost in New Mexico
- 30×40 Barndominium Shell cost in New Mexico
- 40×60 Barndominium Shell cost in New Mexico
- 24×24 Detached Garage cost in New Mexico
- 30×40 Detached Garage cost in New Mexico
- 30×40 Concrete Slab cost in New Mexico
- 40×60 Concrete Slab cost in New Mexico
- 24×36 Standing Seam Metal Roof cost in New Mexico
- 16×24 Composite Deck cost in New Mexico
- 50×80 Pole Barn cost in Arizona
- 50×80 Pole Barn cost in Colorado
- 50×80 Pole Barn cost in Oklahoma
- 50×80 Pole Barn cost in Texas