Home › Cost guides › Florida › Cape Coral–Fort Myers, FL
50×80 Pole Barn Cost in Cape Coral–Fort Myers, FL (2026)
A 50×80 pole barn in Cape Coral–Fort Myers, FL costs about $109,505 turnkey in 2026 ($27.38 per sq. ft.). Here's the itemized breakdown of materials, site prep and labor, using local crew rates.
Try another size or city Free. The numbers below update instantly.
50×80 ft, 16 ft walls (4,000 sq. ft.)
Prices updated Oct 2026
Reference wind speed for this area: 154 mph (ASCE Hazard Tool value at the principal city, not a design value). Wind values here are reference figures for pricing. Confirm the design wind speed with your local building department or engineer.
Estimate only. Actual prices vary. No guarantee or warranty. Use as a guide only. Read the full disclaimer
Itemized cost breakdown
| # | Item | Quantity | Installed |
|---|---|---|---|
| 1 | Site grading & building padLaser-leveled pad 2 ft past the walls, compacted fill | 4,536 sq ft | $5,712 |
| 2 | 4" standard concrete slab3,500 PSI ready-mix, #4 rebar 18" grid, vapor barrier, forms | 52.8 cu yd | $23,503 |
| 3 | 6×6 treated posts, girts & framing lumber34 posts × 20 ft (.60 CCA ground-contact), 2×6 girts at 2 ft incl. gable girts, 2×8 treated skirt board | 34 posts + 2,240 lf | $23,600 |
| 4 | 50' engineered roof trusses & purlins21 trusses at 4 ft on center, high-wind allowance, 2×4 purlins at 2 ft (30 rows) | 21 trusses + 2,460 lf | $21,707 |
| 5 | 29-ga metal roof & wall panels + trimPainted steel panels, ridge cap, corner/door/base trim, closures | 87.9 squares | $19,789 |
| 6 | Overhead & walk doorsDetails in the spec sheet | 🔒 Included in $9.99 spec sheet | 🔒 |
| 7 | Screws, hardware & condensation barrierDetails in the spec sheet | 🔒 Included in $9.99 spec sheet | 🔒 |
| 8 | Permit, stamped drawings & deliveryDetails in the spec sheet | 🔒 Included in $9.99 spec sheet | 🔒 |
| Turnkey total | $109,505 |
The totals above already include every row, including the 🔒 rows. The $9.99 spec sheet lists them item by item with quantities.
What do these terms mean?
- Turnkey total: materials, site work and a crew to build it, all in one number.
- 29-ga metal: the steel panel thickness (a lower gauge number is thicker).
- .60 CCA posts: treated posts rated to go in the ground.
- Purlins and girts: boards across the roof and walls that the metal panels screw into.
- PSI: a concrete strength rating.
- #4 rebar: ½-inch steel bar laid in a grid inside the concrete.
- Vapor barrier: plastic sheeting under the slab that keeps ground moisture out.
Prices use 2026 material costs and typical local crew rates. Site work, custom options and material price swings can move your final price.
Builder Spec Sheet & Shopping List
A sheet for comparing 3 builder bids line by line, and a builder-ready spec so every builder prices the same building.
- Every line item on this page, including the 🔒 rows, in an editable Excel file and a PDF (spec, quantity, materials, labor and installed price)
- A permit and site-prep checklist
- A full itemized takeoff: panel cut lengths, trim, a fastener schedule, lumber counts and concrete yards, with the spacing rule and source for each line
30-day money-back.
Get my spec sheet ($9.99)Save a free project request
Tell us your ZIP and timeline. We aren't connecting requests with builders yet. No cost, no obligation.
Save my requestCommon questions
How much does a 50×80 Pole Barn cost in Cape Coral–Fort Myers, FL?
About $109,505 fully built by a local crew in 2026, or roughly $39,513 for the materials kit alone. Most fair bids land between $93,079 and $131,406.
What drives the price up or down?
Site prep (slope, soil, driveway access), floor choice, doors and insulation, and local labor rates. Lumber and steel prices also move a few percent a year.
Do I need a permit?
Permit requirements vary by county and city. Check with your county or city building office before you build.
How do I make sure I'm getting a fair quote?
Get at least 3 itemized bids for the same spec. Compare them line by line against this breakdown and ask about anything far above or below it.
Related cost guides
- Pole Barn Framing & Erection cost in Cape Coral–Fort Myers, FL
- 50×80 Pole Barn cost in every state
- All Florida cost guides
- 24×24 Pole Barn cost in Cape Coral–Fort Myers, FL
- 30×40 Pole Barn cost in Cape Coral–Fort Myers, FL
- 40×60 Pole Barn cost in Cape Coral–Fort Myers, FL
- 30×40 Barndominium Shell cost in Cape Coral–Fort Myers, FL
- 40×60 Barndominium Shell cost in Cape Coral–Fort Myers, FL
- 24×24 Detached Garage cost in Cape Coral–Fort Myers, FL
- 30×40 Detached Garage cost in Cape Coral–Fort Myers, FL
- 30×40 Concrete Slab cost in Cape Coral–Fort Myers, FL
- 40×60 Concrete Slab cost in Cape Coral–Fort Myers, FL
- 24×36 Standing Seam Metal Roof cost in Cape Coral–Fort Myers, FL
- 16×24 Composite Deck cost in Cape Coral–Fort Myers, FL
- 50×80 Pole Barn cost in Ocala, FL
- 50×80 Pole Barn cost in Pensacola, FL
- 50×80 Pole Barn cost in Lakeland, FL
- 50×80 Pole Barn cost in Gainesville, FL
- 50×80 Pole Barn cost in Tallahassee, FL
- 50×80 Pole Barn cost in Florida
- 50×80 Pole Barn cost in Alabama
- 50×80 Pole Barn cost in Georgia