Free cost calculator

Home › Cost guides › Florida › Lakeland, FL

40×60 Concrete Slab Cost in Lakeland, FL (2026)

A 40×60 concrete slab in Lakeland, FL costs about $28,203 turnkey in 2026 ($11.75 per sq. ft.). Here's the itemized breakdown of materials, site prep and labor, using local crew rates.

Try another size or city Free. The numbers below update instantly.

2,400 sq. ft. · 6" heavy-duty (RVs, lifts, equipment)

Get my spec sheet ($9.99)Change size, city or options (free calculator)
What does the $9.99 spec sheet add? ↓
Concrete & Rebar Materials
$10,163
Ready-mix concrete, rebar, forms & vapor barrier
= Rows 3–6 below, materials only
Excavation & Gravel Base
$5,652
Grading, haul-off & compacted stone base
= Rows 1–2 below, installed price
Turnkey Installed Total
$28,203
$11.75 per sq. ft.
Formed, poured & finished by a local concrete crew
= All rows below, installed price

Prices updated Oct 2026

A fair bid from a local builder in Lakeland, FL should land between $23,973 and $33,844, about 15% below to 20% above this estimate. Quotes for the same building can vary widely, so get 3 quotes on the same spec. If one is outside this range, ask what it includes or leaves out.

Estimate only. Actual prices vary. No guarantee or warranty. Use as a guide only. Read the full disclaimer

Itemized cost breakdown

#ItemQuantityMaterialsLaborInstalled
1Excavation & gradingStrip topsoil, cut/fill to grade, haul-off2,800 sq ft$945$1,538$2,980
2Compacted gravel base (4")Crushed stone, plate-compacted41.5 tons$1,200$1,027$2,672
36" ready-mix concrete (3,500 PSI)Includes 5% waste and thickened edges51.9 cu yd$6,304$0$7,565
4#4 rebar grid (12" on center) & chairsTied rebar on chairs, dowels at doors5,280 lf$2,799$1,746$5,454
5Forms, pour & finish laborSet forms, place, power-trowel finish, cure2,400 sq ft$482$5,136$6,742
6Vapor barrier & control jointsDetails in the spec sheet🔒 Included in $9.99 spec sheet——🔒
7Concrete pump (trailer-mounted)Details in the spec sheet🔒 Included in $9.99 spec sheet——🔒
8Permit & inspection (if required)Details in the spec sheet🔒 Included in $9.99 spec sheet——🔒
Turnkey total$13,270$10,267$28,203

The totals above already include every row, including the 🔒 rows. The $9.99 spec sheet lists them item by item with quantities.

What do these terms mean?
  • Turnkey total: materials, site work and a crew to build it, all in one number.
  • PSI: a concrete strength rating.
  • #4 rebar: ½-inch steel bar laid in a grid inside the concrete.
Adjust this estimate in the free calculatorSave a free project request

Prices use 2026 material costs and typical local crew rates. Site work, custom options and material price swings can move your final price.

$9.99 one-time

Builder Spec Sheet & Shopping List

A sheet for comparing 3 builder bids line by line, and a builder-ready spec so every builder prices the same building.

  • Every line item on this page, including the 🔒 rows, in an editable Excel file and a PDF (spec, quantity, materials, labor and installed price)
  • A permit and site-prep checklist

30-day money-back.

Get my spec sheet ($9.99)
Free

Save a free project request

Tell us your ZIP and timeline. We aren't connecting requests with builders yet. No cost, no obligation.

Save my request

Common questions

How much does a 40×60 Concrete Slab cost in Lakeland, FL?

About $28,203 fully built by a local crew in 2026, or roughly $10,163 for the materials kit alone. Most fair bids land between $23,973 and $33,844.

What drives the price up or down?

Site prep (slope, soil, driveway access), floor choice, doors and insulation, and local labor rates. Lumber and steel prices also move a few percent a year.

Do I need a permit?

Permit requirements vary by county and city. Check with your county or city building office before you build.

How do I make sure I'm getting a fair quote?

Get at least 3 itemized bids for the same spec. Compare them line by line against this breakdown and ask about anything far above or below it.

Related cost guides