Home › Cost guides › Alabama › Montgomery, AL

40×60 Barndominium Shell Cost in Montgomery, AL (2026)

A 40×60 barndominium shell in Montgomery, AL has a dried-in shell estimate of about $108,709 in 2026 ($45.30 per sq. ft.). Here's the itemized breakdown of materials, site prep and labor, using local crew rates.

Shell Materials Kit
$47,021
Frame, trusses, steel, windows, doors & spray foam
= Rows 3–8 below, materials only
Slab, Plumbing Sleeves & Site Prep
$19,717
Grading, under-slab plumbing sleeves & reinforced slab
= Rows 1–2 below, installed price
Dried-in Shell Estimate
$108,709
$45.30 per sq. ft.
Dried-in shell built by a local licensed crew
= All rows below, installed price
A fair bid from a local builder in Montgomery, AL should land between $100,012 and $119,580. Get 3 quotes, and if one is far outside this range, ask why.

Estimate only. Actual prices vary. No guarantee or warranty. Use as a guide only. Read the full disclaimer

Itemized cost breakdown

#ItemQuantityMaterialsLaborInstalled
1Site grading & building padLaser-leveled pad 2 ft past the walls, compacted fill2,816 sq ft$1,204$1,655$3,431
24" standard concrete slab + plumbing sleeves3,500 PSI ready-mix, #4 rebar 18" grid, vapor barrier, forms31.7 cu yd$7,855$5,717$16,286
36×6 treated posts, girts & framing lumber26 posts × 18 ft (.60 CCA ground-contact), 2×6 girts, 2×8 treated skirt board26 posts + 1,600 lf$7,582$8,811$19,672
440' engineered roof trusses & purlins31 trusses at 2 ft on center, 115 mph rated, 2×4 purlins31 trusses + 1,240 lf$12,588$5,287$21,450
529-ga metal roof & wall panels + trimPainted steel panels, ridge cap, corner/door/base trim, closures56.3 squares$7,266$3,172$12,526
6Doors & windowsDetails in the spec sheet🔒 Included in $19 spec sheet$8,954$2,521$13,770
7Closed-cell spray foam (roof & walls)Details in the spec sheet🔒 Included in $19 spec sheet$7,839$3,231$13,284
8Screws, hardware & condensation barrierDetails in the spec sheet🔒 Included in $19 spec sheet$2,792$705$4,196
9Permit, stamped drawings & deliveryDetails in the spec sheet🔒 Included in $19 spec sheet$3,412$0$4,094
Dried-in shell estimate$59,492$31,099$108,709

Prices use 2026 material costs and typical local crew rates. Site work, custom options and material price swings can move your final price.

$19 one-time

Builder Spec Sheet & Shopping List

The same line items as this page in an editable Excel file and a PDF, each with a short spec, quantity, materials, labor and installed price. Plus a permit and site-prep checklist and a sheet for comparing 3 builder bids. 30-day money-back guarantee.

Get my spec pack
Free

Request free local quotes

Tell us your ZIP and timeline. We'll match your request with local builders who serve your area as they join our network. No cost, no obligation.

Request free quotes

Common questions

How much does a 40×60 Barndominium Shell cost in Montgomery, AL?

About $108,709 for a dried-in shell (structure, roof, walls and doors), built by a local crew. Interior finish, utilities and site work are not included. Roughly $47,021 for the materials kit alone. Most fair bids land between $100,012 and $119,580.

What drives the price up or down?

Site prep (slope, soil, driveway access), floor choice, doors and insulation, and local labor rates. Lumber and steel prices also move a few percent a year.

Do I need a permit?

Most counties require a building permit for structures over 200 sq ft. Call your county building department with your size and location before you order materials.

How do I make sure I'm getting a fair quote?

Get at least 3 itemized bids for the same spec. Compare them line by line against this breakdown and ask about anything far above or below it.

Estimate only. Actual prices vary. No guarantee or warranty. Use as a guide only. Read the full disclaimer

Related cost guides