Home › Cost guides › Colorado › 30×40 Barndominium Shell

30×40 Barndominium Shell Cost in Colorado (2026)

A 30×40 barndominium shell in Colorado has a dried-in shell estimate of about $69,701 in 2026 ($58.08 per sq. ft.). Here's the itemized breakdown of materials, site prep and labor, using local crew rates.

Request free local quotes Customize this estimate

Shell Materials Kit

$29,213

Frame, trusses, steel, windows, doors & spray foam

= Rows 3–8 below, materials only

Slab, Plumbing Sleeves & Site Prep

$12,646

Grading, under-slab plumbing sleeves & reinforced slab

= Rows 1–2 below, installed price

Dried-in Shell Estimate

$69,701

$58.08 per sq. ft.

Dried-in shell built by a local licensed crew

= All rows below, installed price

A fair bid from a local builder in Colorado should land between $64,125 and $76,671. Get 3 quotes, and if one is far outside this range, ask why.

Estimate only. Actual prices vary. No guarantee or warranty. Use as a guide only. Read the full disclaimer

Itemized cost breakdown

#	Item	Quantity	Materials	Labor	Installed
1	Site grading & building padLaser-leveled pad 2 ft past the walls, compacted fill	1,496 sq ft	$688	$1,040	$2,074
2	4" standard concrete slab + plumbing sleeves3,500 PSI ready-mix, #4 rebar 18" grid, vapor barrier, forms	15.9 cu yd	$4,975	$3,835	$10,572
3	6×6 treated posts, girts & framing lumber18 posts × 16 ft (.60 CCA ground-contact), 2×6 girts, 2×8 treated skirt board	18 posts + 980 lf	$4,810	$5,198	$12,010
4	30' engineered roof trusses & purlins21 trusses at 2 ft on center, 115 mph rated, 2×4 purlins	21 trusses + 630 lf	$6,880	$3,119	$11,999
5	29-ga metal roof & wall panels + trimPainted steel panels, ridge cap, corner/door/base trim, closures	31.5 squares	$4,501	$2,091	$7,910
6	Doors & windowsDetails in the spec sheet	🔒 Included in $19 spec sheet	$6,554	$2,137	$10,429
7	Closed-cell spray foam (roof & walls)Details in the spec sheet	🔒 Included in $19 spec sheet	$4,712	$2,131	$8,212
8	Screws, hardware & condensation barrierDetails in the spec sheet	🔒 Included in $19 spec sheet	$1,756	$416	$2,606
9	Permit, stamped drawings & deliveryDetails in the spec sheet	🔒 Included in $19 spec sheet	$3,241	$0	$3,889
	Dried-in shell estimate		$38,117	$19,967	$69,701

Customize this estimate (free)Request free local quotes

Prices use 2026 material costs and typical local crew rates. Site work, custom options and material price swings can move your final price.

$19 one-time

Builder Spec Sheet & Shopping List

The same line items as this page in an editable Excel file and a PDF, each with a short spec, quantity, materials, labor and installed price. Plus a permit and site-prep checklist and a sheet for comparing 3 builder bids. 30-day money-back guarantee.

Get my spec pack

Free

Request free local quotes

Tell us your ZIP and timeline. We'll match your request with local builders who serve your area as they join our network. No cost, no obligation.

Request free quotes

Common questions

How much does a 30×40 Barndominium Shell cost in Colorado?

About $69,701 for a dried-in shell (structure, roof, walls and doors), built by a local crew. Interior finish, utilities and site work are not included. Roughly $29,213 for the materials kit alone. Most fair bids land between $64,125 and $76,671.

What drives the price up or down?

Site prep (slope, soil, driveway access), floor choice, doors and insulation, and local labor rates. Lumber and steel prices also move a few percent a year.

Do I need a permit?

Most counties require a building permit for structures over 200 sq ft. Call your county building department with your size and location before you order materials.

How do I make sure I'm getting a fair quote?

Get at least 3 itemized bids for the same spec. Compare them line by line against this breakdown and ask about anything far above or below it.