Home › Cost guides › Maine › 24×36 Standing Seam Metal Roof
24×36 Standing Seam Metal Roof Cost in Maine (2026)
A 24×36 standing seam metal roof in Maine costs about $19,174 turnkey in 2026 ($15.08 per sq. ft. of roof). Here's the itemized breakdown of materials, site prep and labor, using local crew rates.
Estimate only. Actual prices vary. No guarantee or warranty. Use as a guide only. Read the full disclaimer
Itemized cost breakdown
| # | Item | Quantity | Installed |
|---|---|---|---|
| 1 | Tear-off & disposal (1 layer)Remove shingles & felt, dumpster, magnet sweep | 12.7 squares | $1,692 |
| 2 | Roof deck repair allowanceReplace up to 8% of decking, re-nail to code | 4 sheets | $305 |
| 3 | High-temp synthetic underlaymentIce & water shield at eaves/valleys + synthetic field | 12.7 squares | $1,158 |
| 4 | 24-ga standing seam panels16" wide panels, mechanical seam, SMP finish | 12.7 squares | $11,609 |
| 5 | Ridge, eave, rake & valley trimMatching trim, Z-closures, flashing | 168 lf | $2,428 |
| 6 | Panel clips, pancake screws & sealantDetails in the spec sheet | 🔒 Included in $19 spec sheet | $686 |
| 7 | Pipe boots, vented ridge & chimney flashingDetails in the spec sheet | 🔒 Included in $19 spec sheet | $956 |
| 8 | Permit & final inspectionDetails in the spec sheet | 🔒 Included in $19 spec sheet | $340 |
| Turnkey total | $19,174 |
Prices use 2026 material costs and typical local crew rates. Site work, custom options and material price swings can move your final price.
Builder Spec Sheet & Shopping List
The same line items as this page in an editable Excel file and a PDF, each with a short spec, quantity, materials, labor and installed price. Plus a permit and site-prep checklist and a sheet for comparing 3 builder bids. 30-day money-back guarantee.
Get my spec packRequest free local quotes
Tell us your ZIP and timeline. We'll match your request with local builders who serve your area as they join our network. No cost, no obligation.
Request free quotesCommon questions
How much does a 24×36 Standing Seam Metal Roof cost in Maine?
About $19,174 fully built by a local crew in 2026, or roughly $8,595 for the materials kit alone. Most fair bids land between $17,640 and $21,091.
What drives the price up or down?
Site prep (slope, soil, driveway access), floor choice, doors and insulation, and local labor rates. Lumber and steel prices also move a few percent a year.
Do I need a permit?
Most counties require a building permit for structures over 200 sq ft. Call your county building department with your size and location before you order materials.
How do I make sure I'm getting a fair quote?
Get at least 3 itemized bids for the same spec. Compare them line by line against this breakdown and ask about anything far above or below it.
Related cost guides
- Metal Roof Replacement cost in Maine
- 24×36 Standing Seam Metal Roof cost in every state
- All Maine cost guides
- 24×24 Pole Barn cost in Maine
- 30×40 Pole Barn cost in Maine
- 40×60 Pole Barn cost in Maine
- 50×80 Pole Barn cost in Maine
- 30×40 Barndominium Shell cost in Maine
- 40×60 Barndominium Shell cost in Maine
- 24×24 Detached Garage cost in Maine
- 30×40 Detached Garage cost in Maine
- 30×40 Concrete Slab cost in Maine
- 40×60 Concrete Slab cost in Maine
- 16×24 Composite Deck cost in Maine
- 24×36 Standing Seam Metal Roof cost in New Hampshire