Free cost calculator

Home › Cost guides › California › 24×24 Pole Barn

24×24 Pole Barn Cost in California (2026)

A 24×24 pole barn in California costs about $26,197 turnkey in 2026 ($45.48 per sq. ft.). Here's the itemized breakdown of materials, site prep and labor, using local crew rates.

Request free local quotesCustomize this estimate
Materials-Only Kit
$10,308
Delivered lumber, trusses, metal panels & hardware
= Rows 3–7 below, materials only
Concrete Slab & Site Prep
$5,390
Grading, forms, rebar & poured concrete floor
= Rows 1–2 below, installed price
Turnkey Installed Total
$26,197
$45.48 per sq. ft.
Complete build with a local licensed crew, materials & slab
= All rows below, installed price
A fair bid from a local builder in California should land between $24,101 and $28,817. Get 3 quotes, and if one is far outside this range, ask why.

Estimate only. Actual prices vary. No guarantee or warranty. Use as a guide only. Read the full disclaimer

Itemized cost breakdown

#ItemQuantityMaterialsLaborInstalled
1Site grading & building padLaser-leveled pad 2 ft past the walls, compacted fill784 sq ft$391$641$1,238
24" standard concrete slab3,500 PSI ready-mix, #4 rebar 18" grid, vapor barrier, forms7.6 cu yd$1,810$1,650$4,152
36×6 treated posts, girts & framing lumber12 posts × 14 ft (.60 CCA ground-contact), 2×6 girts, 2×8 treated skirt board12 posts + 576 lf$2,393$2,162$5,466
424' engineered roof trusses & purlins7 trusses at 4 ft on center, 115 mph rated, 2×4 purlins7 trusses + 312 lf$1,905$1,255$3,792
529-ga metal roof & wall panels + trimPainted steel panels, ridge cap, corner/door/base trim, closures17.2 squares$2,746$1,350$4,915
6Overhead & walk doorsDetails in the spec sheet🔒 Included in $19 spec sheet$2,172$750$3,506
7Screws, hardware & condensation barrierDetails in the spec sheet🔒 Included in $19 spec sheet$1,092$239$1,597
8Permit, stamped drawings & deliveryDetails in the spec sheet🔒 Included in $19 spec sheet$1,276$0$1,531
Turnkey total$13,785$8,047$26,197
Customize this estimate (free)Request free local quotes

Prices use 2026 material costs and typical local crew rates. Site work, custom options and material price swings can move your final price.

$19 one-time

Builder Spec Sheet & Shopping List

The same line items as this page in an editable Excel file and a PDF, each with a short spec, quantity, materials, labor and installed price. Plus a permit and site-prep checklist and a sheet for comparing 3 builder bids. 30-day money-back guarantee.

Get my spec pack
Free

Request free local quotes

Tell us your ZIP and timeline. We'll match your request with local builders who serve your area as they join our network. No cost, no obligation.

Request free quotes

Common questions

How much does a 24×24 Pole Barn cost in California?

About $26,197 fully built by a local crew in 2026, or roughly $10,308 for the materials kit alone. Most fair bids land between $24,101 and $28,817.

What drives the price up or down?

Site prep (slope, soil, driveway access), floor choice, doors and insulation, and local labor rates. Lumber and steel prices also move a few percent a year.

Do I need a permit?

Most counties require a building permit for structures over 200 sq ft. Call your county building department with your size and location before you order materials.

How do I make sure I'm getting a fair quote?

Get at least 3 itemized bids for the same spec. Compare them line by line against this breakdown and ask about anything far above or below it.

Related cost guides